Monthly Archives: December 2024

　　n terms of the machinery of waste stripping machines, the most common faults of automatic die-cutting machines are channel tilting. This is mostly caused by foreign objects falling into the die-cutting area. Usually, the carton stripper machine under the drag shaft should be adopted to rotate the channel to the upper limit point.

　　At this time, check its relative position with the upper clean channel to ensure the angle of the moving channel and the distance between the upper clean channel, so that the problem can be solved. Secondly, the common faults of the die-cutting machine should be eliminated in time.

　　Waste stripping machine waste stripping principle: After drying, compressed air enters the reduction motor and is processed jointly through the tail of the manual air valve and the sliding air valve, bobst waste stripper driving the pneumatic motor to output a stable torque, and then drives the high-hardness chain claw to rotate rapidly, so that the claw produces a grabbing action.

　　Effect: After punching and cutting according to the carton development model, the remaining waste around is cleaned up by the fast-moving claw, which can replace the inefficient situation of hammering and manual tearing widely used in domestic carton factories, and effectively improve the quality of cartons.

　　Our company can undertake OEM orders and purchase and distribution agency business of various printing machinery and equipment. For details, please contact: Email: tina@szhsu.com

　　What is the installation method of Huaxu brand high-quality inner hole waste stripping machine?

　　Installation of inner hole waste cleaning machine

　　1. Check the appearance of the machine carefully according to the contract, and check whether the model and accessories of the machine are consistent with your product specifications.

　　2. Check whether the parts of the machine are damaged during transportation.

　　3. The machine should be placed carefully during transportation.

　　4. This equipment has been installed and debugged before leaving the factory, and all inspections have been passed before leaving the factory. You only need to prepare 220V power supply and gas source (pressure is 6~8 kg, and the gas volume reaches 0.17 cubic meters per second) at your place. The waste cleaning mold is installed according to the actual product waste cleaning hole size.

　　5. Connect the three-phase 220v power supply, and the air pipe is connected to the air compressor.

　　6. Press the power switch, put the product on the working platform, use the paper stopper to position the product, turn on the switch to “manual”, and install the ejector pin in the empty position.

　　7. After the ejector is installed, press the up and down switches to check whether the ejector is aligned with the hole. After alignment, turn the switch to “automatic”.

　　8. Enter the working state, put the paper no higher than the paper plate each time, and the products are neatly placed, and then step on the foot switch.

　　9. The machine is equipped with a safety induction optical fiber. When entering the automatic working program, if a person puts his hand into the working platform, the machine will stop working immediately to ensure the safety of the operator.

　　Our company can undertake OEM orders and purchase and distribution agency business of various printing machinery and equipment. For details, please contact: Email: tina@szhsu.com

　　Please note the following when using electric and pneumatic scrap strippers: When operating the electric scrap stripper, you should operate it with both hands to ensure that the plug and working environment are clean; you need to take a 1-minute break every 30 minutes of work to ensure good heat dissipation.

　　Lubricate chains and gears before working every day, and clean the surface of the machine to ensure that no paper debris blocks the suction and exhaust ports.

　　The pneumatic waste stripper needs to ensure that the air pressure reaches 0.8KPA, and the length of the trachea is preferably within 6 meters to reduce air pressure loss. Maintain the cutter regularly, add air tool oil to prevent rust, and drain water regularly to avoid water entering the machine. Clean up paper scraps before the end of each day¨s work to ensure that the air vents are clear.