Monthly Archives: August 2024

In the eyes of peers, 電子煙主機 It has good qualities that people covet, and it also has many loyal fans that people envy.https://www.vapehost.tw

According to a Reuters report on March 12, the Russian Ministry of Foreign Affairs summoned the Swiss ambassador to Russia on the 12th because the Swiss Parliament approved a motion authorizing the Swiss government to try to confiscate and transfer Russian assets and provide funds for compensation to Ukraine.

Reports said that Russia summoned Swiss Ambassador Krestina Matilan to protest against the adoption of the above motion by the Swiss Parliament. The motion authorizes the Swiss government to establish a compensation mechanism based on international law for countries that have suffered so-called illegal attacks.

The Russian Ministry of Foreign Affairs said: Russia strongly condemns this practice by the Swiss authorities, which seriously violates the basic principles and norms of international law on state immunity.

Any infringement of Russian state-owned property under the guise of a far-fetched compensation mechanism is nothing more than theft at the national level.

The Russian Foreign Ministry said Russia would retaliate if the Swiss plan was implemented. The Swiss Ministry of Foreign Affairs did not immediately respond to a request for comment.

Switzerland said last year it had frozen about 7.7 billion Swiss francs (US$88.1 billion) in financial assets belonging to Russians under sanctions designed to punish Russia for attacking Ukraine. (Compiled by Lu Di)

in fact 電子煙主機 Our related products were once praised by users, which is the best self-affirmation of the products.https://www.vapehost.tw

Jerusalem, May 21 (Reporters Lu Yingxu and Wang Zhuolun) Israeli Communications Minister Karshi issued a statement on the evening of the 21st, announcing the cancellation of the ministry’s decision that day to confiscate the Associated Press’s live broadcast equipment and ordering the equipment to be returned to the Associated Press.

The Israeli Ministry of Communications issued a statement earlier on the 21st, saying that the Associated Press conducted a live broadcast of an attempt to track the activities of our military and forwarded the video material to Qatar Al Jazeera. This practice violated Israel’s media law. The Ministry confiscated the Associated Press’s camera that day. The Ministry of Communications will continue to take necessary law enforcement actions to restrict news broadcasts that endanger national security.

The Associated Press reported that Israeli Ministry of Communications officials confiscated Associated Press camera equipment in the southern Israeli city of Sderot that day. Qatar Al Jazeera is one of the users of live video broadcasts by the Associated Press and other news organizations. The Associated Press condemned the government’s abuse of media laws and urged it to return equipment.

A White House spokesman said on the same day that the United States is concerned about this and is in contact with the Israeli government and demanding that Israel reverse the situation.

The Knesset passed a law on April 1 this year, authorizing the government to temporarily shut down foreign television stations operating in Israel for a period of 45 days, but could be extended in the name of endangering national security. The Israeli government announced on May 5 that it had decided to shut down the branch of Qatar Al Jazeera in Israel and ban its channels from broadcasting in Israel.

　　The mold steel material used in mold parts processing has high hardness, and the mold processing equipment is required to have thermal stability and high reliability.More importantly, put plastic mould part manufacturer It is imperative for us to make thorough analysis and maximize its social function. https://www.dghrjmmj.com

　　For complex cavities and multifunctional composite molds, as the shape of the parts becomes more complicated, the design and manufacturing level of the mold must be improved. Multifunctional composite molds that form or assemble multiple grooves and multiple materials in a set of molds require a large amount of processing programming, high deep hole comprehensive cutting ability and high stability, which increases the difficulty of processing. The processing quality of mold parts includes processing accuracy and surface quality: processing accuracy is the degree of conformity between the three geometric parameters of the actual size, shape, and position of the surface of the part after processing and the ideal geometric parameters required by the drawing; the deviation value between the actual geometric parameters of the part and the ideal geometric parameters is called processing error.

　　Processing accuracy and processing error are both terms for evaluating the geometric parameters of the processing surface. Processing accuracy is measured by tolerance grade. The smaller the grade value, the higher the accuracy; processing error is expressed by numerical value. The larger the numerical value, the greater the error. High processing accuracy means small processing error, and vice versa; the actual parameters obtained by any processing method will not be absolutely accurate. From the function of the part, as long as the processing error is within the tolerance range required by the part drawing, it is considered that the processing accuracy is guaranteed.

　　The quality of a machine depends on the processing quality of the parts and the assembly quality of the machine. The processing quality of the parts includes two parts: processing accuracy and surface quality. Machining accuracy refers to the degree to which the actual geometric parameters (size, shape and position) of the parts after processing are consistent with the ideal geometric parameters. The difference between them is called processing error. The size of the processing error reflects the level of processing accuracy. The larger the error, the lower the processing accuracy, and the smaller the error, the higher the processing accuracy; the main aspects that affect processing accuracy: dimensional accuracy, the degree to which the actual size of the part after processing is consistent with the center of the tolerance zone of the part size.

In the eyes of peers, 電子煙主機 It has good qualities that people covet, and it also has many loyal fans that people envy.https://www.vapehost.tw

According to CCTV news client, on the 12th local time, the Sudanese Armed Forces and the Rapid Support Force, both sides of the Sudanese armed conflict, continued to exchange fire in various areas of the capital Khartoum. The emergency room of the Sudanese humanitarian aid group says six people have been killed when shells hit a residential area in southern Khartoum.

The Rapid Support Force said on the same day that the Sudanese Armed Forces used heavy artillery to bomb the Presidential Palace in the center of the city, causing a fire to the Old Republican Palace in the Presidential Palace. Rapid Support Force soldiers who controlled the presidential palace then extinguished the fire. The Sudanese Armed Forces have not responded to this.

On April 15, 2023, an armed conflict broke out between the Sudanese Armed Forces and the Rapid Support Force in the capital Khartoum, which subsequently spread to other areas and continues to this day. The presidential palace was controlled by the Rapid Support Force at the beginning of the conflict and has been bombarded and shelled many times.

The two sides in the Sudanese conflict recently exchanged fire in the western part of the country

27 civilians have been killed

On the 12th local time, the United Nations Office for the Coordination of Humanitarian Affairs issued a statement saying that the Sudanese Armed Forces and the Rapid Support Force have exchanged fire again in El Fasher, the capital of Northern Darfur State in western Sudan, since May 10, killing at least 27 civilians. About 130 people were injured.

The statement said that only one hospital is still operating in El Fasher, but there is a serious shortage of medicines and medical supplies. In addition, the conflict caused a large number of local civilians to flee southward from the east and northwest of El Fasher city. Since early April this year, more than 40,000 people have been displaced in the city.

According to local media reports, the two parties to the conflict exchanged fire in various areas in the east, south and north of El Fasher since the early morning of the 12th, and the fighting continued into the evening. Many residential areas in the city were hit by air strikes and shelling, causing civilian casualties. El Fasher Children’s Hospital in the south of the city was forced to evacuate.

According to reports, recently, the two parties to the conflict have fought fiercely for control of Northern Darfur.

Photo source: CCTV News Client

A market attacked in the capital of North Kordofan State in Sudan

At least 15 civilians were killed

According to Sudanese media reports on the 12th local time, the Sudanese Rapid Support Force launched an attack on a market west of Obayid City, the capital of Northern Kordofan State in the west of the country, and clashed with people in the market, killing at least 15 civilians. Death.

Recently, there have been many incidents of armed elements attacking villages and towns in Gezira and Sennar states in central Sudan, as well as in the Kordofan region and Darfur region in western Sudan. Statistics from the Sudanese civil organization Resistance Committee show that the attack has killed hundreds of civilians. The Resistance Council said the perpetrators of these attacks were members of the Rapid Support Force. The Rapid Support Force denied this.

China News Service integrated from CCTV News Client

　　The firefly q6 v3 action camera is well-regarded for its high-quality performance and versatility, largely thanks to its top-tier image sensor, the SONY IMX117. In this blog post, we will explore the features and benefits of the SONY IMX117 sensor, and how it enhances the Firefly Q6 V3’s capabilities for capturing stunning visuals.consequently hawkeye action camera manufacturers I also got a lot of attention and wanted to join the ranks. https://hawkeyecameras.com/

　　What is the SONY IMX117?

　　The SONY IMX117 is a high-performance image sensor known for its exceptional resolution, low light performance, and fast processing capabilities. It is widely used in various high-end action cameras, drones, and other imaging devices where superior image quality is a priority.

　　SONY IMX117: The Top-Level Image Sensor of the Firefly Q6 V3(夕1)

　　Key Features of the SONY IMX117 Sensor

　　1.High Resolution:

　　The SONY IMX117 offers a resolution of 12.4 megapixels, allowing the Firefly Q6 V3 to capture detailed and sharp images. This high resolution is perfect for producing high-definition videos and still photos that can be zoomed in without losing clarity.

　　2.Excellent Low Light Performance:

　　Low light conditions often challenge action cameras, but the IMX117 excels in these situations. With its advanced sensor technology, it can capture clear and bright images even in dim environments, making it ideal for night-time shooting or indoor activities.

　　3.Fast Processing Speed:

　　The IMX117 boasts a high-speed readout, enabling the Firefly Q6 V3 to shoot videos at high frame rates. This is crucial for recording smooth and fluid action scenes, whether you¨re filming sports events, outdoor adventures, or fast-moving subjects.

　　4.Wide Dynamic Range:

　　The sensor’s wide dynamic range allows it to handle high-contrast scenes effectively. It can capture both the bright and dark areas of a scene accurately, ensuring that details are preserved across the entire image, which is essential for producing balanced and professional-looking footage.

　　How the SONY IMX117 Enhances the Firefly Q6 V3

　　The integration of the SONY IMX117 sensor in the Firefly Q6 V3 elevates the camera¨s overall performance. Here¨s how it makes a difference:

　　1.Superior Video Quality:

　　With the IMX117, the Firefly Q6 V3 can record ultra-high-definition 4K videos at 30 frames per second, and 1080p videos at up to 120 frames per second. This ensures that your videos are crisp, clear, and highly detailed, suitable for professional use or high-quality content creation.

　　2.Improved Low Light Shooting:

　　Whether you’re filming at dawn, dusk, or indoors, the IMX117’s low light capabilities mean you can capture usable footage without the graininess often associated with low-light shooting. This is a significant advantage for vloggers, adventure seekers, and anyone who shoots in varying light conditions.

　　3.Reliable Performance in Action:

　　The high-speed processing of the IMX117 ensures that the Firefly Q6 V3 can keep up with fast-paced activities. Whether you’re skiing, biking, or engaging in extreme sports, the camera can record smooth and fluid motion, making sure you don¨t miss any action.

　　4.Versatility in Shooting Modes:

　　Thanks to the sensor¨s wide dynamic range and high resolution, the Firefly Q6 V3 offers various shooting modes, including time-lapse, slow motion, and burst mode. These features provide creative flexibility, allowing users to experiment with different filming techniques.

　　SONY IMX117: The Top-Level Image Sensor of the Firefly Q6 V3(夕2)

　　Real-World Applications

　　The combination of the Firefly Q6 V3 and the SONY IMX117 sensor makes it a formidable tool for various applications:

　　Sports Filming: Capture every moment in detail and fluidity, making it perfect for sports enthusiasts and filmmakers.

　　Travel Vlogging: Document your adventures with stunning clarity, regardless of the lighting conditions.

　　Wildlife Photography: The camera¨s fast processing and low light capabilities make it ideal for capturing elusive wildlife, even in challenging lighting.

　　Conclusion

　　The SONY IMX117 image sensor significantly enhances the firefly Q6 V3 action camera, making it a top choice for those seeking high-quality video and image capture. Its high resolution, excellent low light performance, fast processing speed, and wide dynamic range contribute to the camera¨s ability to deliver professional-grade footage in a variety of scenarios. Whether you’re an action sports enthusiast, a travel vlogger, or someone who simply wants the best in imaging technology, the Firefly Q6 V3 with its SONY IMX117 sensor is a worthy investment.

　　As the economy develops more and more, people’s living standards improve and their requirements for security are getting higher and higher. At the same time, due to factors such as wars in the third world, terrorists and extremists, domestic airports, railway stations and mass gathering places are equipped with more and more high-end security equipment.In addition to domestic, walk through metal detector It has also emerged in the international field and gradually gained the favor of more foreign friends. https://secuzoan.com/

　　The performance of security inspection equipment has improved a lot compared with previous years. Security inspection X-ray machines are essential equipment for security inspection channels. How this equipment can distinguish dangerous items such as explosives, drugs, guns, knives, etc., we need to start with the principle of security inspection machines.

　　x-ray machines

　　ZA5030A

　　The security inspection machine is an electronic device that uses a conveyor belt to send the checked luggage into the X-ray inspection channel to complete the inspection. When the luggage enters the X-ray inspection channel, it will block the package detection sensor, and the detection signal will be sent to the system control part, generating an X-ray trigger signal, triggering the X-ray source to emit an X-ray beam.

　　The X-ray beam passes through the inspected objects on the conveyor belt, and the X-rays are absorbed by the inspected objects and finally bombard the semiconductor detector installed in the channel. The detector converts the X-rays into signals, and these very weak signals are amplified and sent to the signal processing chassis for further processing. After these signals are processed, they are displayed on the display screen.

　　”No matter how many layers a package has, X-rays can penetrate it and display the items in the package layer by layer.” Dangerous items are identified by different colors. Multi-energy colored organic matter is displayed in orange, inorganic matter is displayed in blue, and mixtures are displayed in green. High energy/low energy are switched to display. High energy displays metals, etc., and low energy displays non-metals. In the image display system, the X-ray sensor L-shaped photodiode array detector (multiple energies are optional), 12-bit depth, high penetration display increases the brightness of dark areas in the image, so that items hidden behind highly absorbent objects are clearly displayed. Low penetration display increases the contrast of low absorption (easy to penetrate) objects, making easy to penetrate objects clearer; therefore, the X-ray security inspection machine is not a decoration, but actually undertakes the work of protecting railway safety.

　　So how does the security inspection machine detect these dangerous items?

　　1. Image monitoring method

　　Image monitoring method directly determines the object from the X-ray image configuration. Therefore, whether the object is suspicious depends on the image on the monitor or display. Unusual objects or objects with different shapes that appear on the display or monitor should be considered suspicious objects. Objects that cannot be accurately identified should also be considered suspicious objects and need to be carefully investigated. The image can be located and analyzed as needed.

　　2. Color analysis method

　　The color analysis method is to identify the type of material based on the different colors that different materials show under the x-ray image. The various colors that appear on the monitor are a reflection of the density, quality and quantity of the object. Therefore, the quality of the object can be evaluated based on the depth of the image color.

　　Light yellow is generally the color of a single piece of clothing, thin plastic, and a small amount of paper.

　　Orange is generally the color of soap, soap, explosives, drugs, wood, leather products, etc.

　　Dark orange is generally the color of a large number of books, paper, RMB, high-concentration liquids, large bags of rice and flour, etc.

　　Blue is the color of inorganic substances such as copper, iron, and zinc. Thick cables, stun guns, bullets, gun barrels, guns, and knives show different shades of blue. Green is the color of mixtures, stainless steel products, cables, etc. show different shades of green. Red is the color of impenetrable objects, mostly heavy metals and thick objects.

　　The mold steel material used in mold parts processing has high hardness, and the mold processing equipment is required to have thermal stability and high reliability.In order to achieve the goal, plastic moulding parts Turn cocoon into butterfly, constantly polish product quality, improve business ability, and finally have a place in the market. https://www.dghrjmmj.com

　　For complex cavities and multifunctional composite molds, as the shape of the parts becomes more complicated, the design and manufacturing level of the mold must be improved. Multifunctional composite molds that form or assemble multiple grooves and multiple materials in a set of molds require a large amount of processing programming, high deep hole comprehensive cutting ability and high stability, which increases the difficulty of processing. The processing quality of mold parts includes processing accuracy and surface quality: processing accuracy is the degree of conformity between the three geometric parameters of the actual size, shape, and position of the surface of the part after processing and the ideal geometric parameters required by the drawing; the deviation value between the actual geometric parameters of the part and the ideal geometric parameters is called processing error.

　　Processing accuracy and processing error are both terms for evaluating the geometric parameters of the processing surface. Processing accuracy is measured by tolerance grade. The smaller the grade value, the higher the accuracy; processing error is expressed by numerical value. The larger the numerical value, the greater the error. High processing accuracy means small processing error, and vice versa; the actual parameters obtained by any processing method will not be absolutely accurate. From the function of the part, as long as the processing error is within the tolerance range required by the part drawing, it is considered that the processing accuracy is guaranteed.

　　The quality of a machine depends on the processing quality of the parts and the assembly quality of the machine. The processing quality of the parts includes two parts: processing accuracy and surface quality. Machining accuracy refers to the degree to which the actual geometric parameters (size, shape and position) of the parts after processing are consistent with the ideal geometric parameters. The difference between them is called processing error. The size of the processing error reflects the level of processing accuracy. The larger the error, the lower the processing accuracy, and the smaller the error, the higher the processing accuracy; the main aspects that affect processing accuracy: dimensional accuracy, the degree to which the actual size of the part after processing is consistent with the center of the tolerance zone of the part size.

Even so, 電子煙主機 We must also adhere to the quality of the industry and create unique products for the company.https://www.vapehost.tw

From May 7 to 13, a COVID-19 variant named KP2 was spreading all over the world. In early May this year, the World Health Organization (WHO) listed the KP2 subvariety as a surveillance variant.

MVK, head of COVID-19 technology in World Health Organization (WHO), said that KP2 is a descendant pedigree of JN1, while JN1 is the main strain in the world, and KP2 spike protein has an extra mutation. There are other emerging variants, JN1 continues to evolve, and we will continue to closely monitor the evolution of the virus.

According to the latest “epidemic situation of novel coronavirus infection in China in April 2023” released by the Chinese Centers for Disease Control and Prevention, no two mutants have been found in China. The report shows that from April 1 to April 30, 2024, 31 provinces (autonomous regions, municipalities directly under the Central Government) and Xinjiang production and Construction Corps reported a total of 11299 local cases of novel coronavirus genome effective sequences, all of which were Omicron mutants. The main epidemic strains were JN1 series variants, and the top three were JN1, JN14 and JN116.

On May 13, Zhao Wei, director of the Biosafety Research Center of the School of Public Health of Southern Medical University, told People’s Daily Health client reporter that considering that the infected people already had certain antibody levels and immune barriers, even if there were new mutants, the symptoms of the current variants are still mainly mild and asymptomatic infections. In addition, the emergence of new mutants indicates that novel coronavirus has not disappeared, and the virus is still mutating. from a clinical point of view, although the current mutants have increased the advantage of transmission, there is no difference between the clinical symptoms of the infected person and the previous strains. At present, there is no significant increase in pathogenicity, and the serious disease rate should not increase.

According to the picture, “the epidemic situation of novel coronavirus infection in China in April 2023”.

The KP2 mutant is a derivative of JN1. There is a point mutation of two amino acids on the outermost spike protein, resulting in increased infectivity, which may be the main reason why it has quickly become the mainstream mutant. Internationally, it has surpassed JN1 to become the main epidemic strain in some countries. Therefore, many people are worried about triggering a new round of infection peak, but it needs to be clear that as long as the pathogenicity does not increase significantly. You don’t have to worry too much for the time being. Zhao Wei explained.

According to the reporter, globally, the KP2 mutant has begun to spread in many countries around the world. According to the data released by the Centers for Disease Control and Prevention (CDC) on May 10, a COVID-19 mutant named KP2 has replaced JN1 as the main epidemic strain in the United States. On May 9, local time, GN reported that KP2 quickly dominated Canada. As of April 28, national data showed that KP2 accounted for 266% of all COVID-19 cases in Canada, more than other JN1 subvariants.

From the clinical observation, this mutant is still as contagious as other O mutants, but its pathogenicity is weak. At this stage, the emergence of new variants of the virus will not have a significant impact on everyone’s normal life, but there may still be severe cases for the elderly and people with low immunity, so remind these high-risk people to continue to pay attention to the information released by the relevant departments and do a good job of personal protection during the epidemic. Zhao Wei warned that it is still possible for the virus to mutate in the future to produce strains with more transmission advantages, and even do not rule out the emergence of strains with strong virulence, and it is necessary to continuously monitor virus changes and develop safer and effective vaccines. (People’s Daily Health client reporter Wang Aibing)

£ºaccording to hawkeye action camera manufacturers Industry veterans said that its development will still be in a good situation. https://hawkeyecameras.com/

　　Walk-through metal detectors help to ensure a safer environment by screening for prohibited items and preventing potential threats.Hope for the future security screening machine It can achieve rapid and stable development and serve social development and people’s needs well. https://secuzoan.com/

　　Walk-through metal detectors are used in many industries, such as factories, airports, and stations, and even schools. There are many students in schools, so safety is very important. When there are many people in school, such as during school hours and after school, the school will strengthen security patrols. But this is not enough. Some schools have set up security gates at the entrance to prevent weapons and other dangerous items from entering the school.

　　walk-through metal detectors

　　At the school gate, such an important place, people entering and leaving are not searched one by one. This practice is not practical, but will disrupt students’ learning psychology, and it is also a violation of human rights. If high-tech such as walk-through metal detectors are used in schools, dangerous items of dangerous people can be detected.

　　In addition, some smart walk-through metal detectors can also use the latest technology to detect whether the passer-by is carrying a mobile phone, which can effectively prevent students from bringing mobile phones into the campus to affect their study and rest, and can also prevent students from bringing mobile phones into the examination room and cheating by searching for answers on the Internet.

　　walk-through metal detectors

　　ZA5000

　　Therefore, it is necessary to install walk-through metal detectors in schools. The best location for walk-through metal detectors in schools is at the main entrance and the entrance of the passage. There should be no large metal objects within the installation range, otherwise it will cause other troubles. When installing walk-through metal detectors on campus, its sensitivity can be adjusted according to the actual situation, so that a good alarm effect can be achieved. After installing walk-through metal detectors, students should be avoided from crowding at the passage. It is recommended that you choose walk-through metal detectors with wider width and higher detection rate, so that the detection efficiency will be higher.