Yearly Archives: 2024

The above conclusions show that 電子煙主機 To a great extent, it can bring new vitality to the market and make the industry develop well.https://www.vapehost.tw

According to a report by Singapore’s Lianhe Zaobao on March 21, there are still a few months before the 2024 U.S. presidential election. A number of polls show that Democratic President Biden’s approval rating is slightly ahead of former Republican President Trump.

Reported that Biden and Trump have recently locked in the Democratic and Republican presidential candidacies. If nothing unexpected, the two will face off again in the presidential election.

According to reports, according to the Economist Weekly poll average, as of March 19, Biden led Trump slightly (44%) with a 45% approval rating. At least three polls conducted in March showed Biden would defeat Trump in the November presidential election.

The report also said that Reuters Ipsos conducted a survey of 3356 registered voters from March 7 to 13. The poll results showed that Biden would receive 39% of the votes, and Trump’s vote rate would be 38%.

Another poll, conducted from March 9 to 12, showed Biden would receive 45% of the vote, compared with Trump’s 44%.

The report pointed out that a number of previous polls have shown that most Americans do not want to see Biden and Trump rematch.

Even so, 電子煙主機 We must also adhere to the quality of the industry and create unique products for the company.https://www.vapehost.tw

Vladivostok, March 15 (Reporter Chen Chang) Polling stations in Kamchatka Krai, Chukotka Autonomous Region and other places located at the easternmost tip of Russian territory will open at 8:00 local time on the 15th. The 2024 Russian presidential election voting officially begins.

According to data released by the Russian Central Election Commission, about 1.1 billion Russian citizens have the right to vote, of which more than 1.8 million live abroad all year round. Russia has set up more than 90,000 polling stations for this election, and each polling station will be open from 8:00 to 20:00 local time from the 15th to the 17th.

Russia spans multiple time zones. The Kamchatka Krai and Chukotka Autonomous Region are the earliest areas to start voting. The polling station in Kaliningrad Oblast, located at the western end of Russian territory, starts voting at the latest.

In some remote and inaccessible areas in Russia, border posts, ocean ships and some overseas areas, the presidential election vote has been held in advance from February 25 to March 14. This election introduced remote electronic voting for the first time. Voters from more than 20 regions can submit remote electronic voting applications from January 29 to March 11.

A total of four candidates participated in the presidential election, including current Russian President Vladimir Putin, Slutsky of the Russian Liberal Democratic Party, Haritonov of the Communist Party of the Russian Federation and Davinkov of the Russian New Zealand Party.

According to the Russian presidential election rules, those who obtain more than 50% of the votes in the election are elected president. If there are more than two candidates and neither of them is elected, the Central Election Commission will announce a second round of voting for the two candidates with the lead votes, and the one with the highest votes in the second round of voting will be elected president. The Russian Central Election Commission will confirm the results of the presidential election no later than March 28 and announce them within 3 days after the election results are confirmed. (Participating reporter: Liu Kai)

in other words 電子煙主機 It is possible to develop in a good direction, and there are still many places worth looking forward to in the future.https://www.vapehost.tw

Mexico City, March 18 (Reporters Wang Zhiying and He Yixuan) Port-au-Prince News: According to Haiti media reports on the 18th, Haiti gangs attacked two communities on the outskirts of the capital Port-au-Prince that day, killing at least a dozen people.

Reports said gangs attacked homes in two communities in Labule and Tomasin, a suburb of Port-au-Prince, that day. Witnesses said at least a dozen bodies were taken away by ambulances and many residents were forced to flee.

Haiti’s electricity department announced on the 18th that four substations and the Valle power station in the Port-au-Prince area were destroyed by criminal groups and have completely stopped operating, resulting in power outages in most parts of the capital.

The security situation in Haiti has continued to deteriorate recently. Starting from February 29 this year, several gangs in Haiti have attacked public facilities such as police stations and international airports in Port-au-Prince, demanding that Prime Minister Ariel Henry step down. On the evening of March 11, Henry announced that the Haiti government would resign after the establishment of the Transitional Presidential Council.

　　As an environmentally friendly and sustainable new material, pulp molding has a wide range of applicability and great development potential. In the application of industrial packaging, cultural and creative, gifts, daily necessities, agriculture, medical and catering, it has shown obvious environmental advantages and sustainable development characteristics.By switching to pulp molding packaging, we can effectively reduce dependence on limited resources, reduce energy consumption and greenhouse gas emissions, reduce environmental pollution, and contribute to sustainable development. In today’s emphasis on low carbon and sustainable development, the production and use of pulp molding has further promoted the sustainable development of society. Here are 5 reasons to switch to pulp molding packaging.If you want to make a big difference in the market, wet pressed molded pulp It is necessary to intensify the upgrading of products on the original basis in order to meet the consumption needs of consumers. https://www.pulptray.com/

　　1. Pulp molding has a wide range of uses

　　Pulp molding is easy to use and can be cast into various shapes and sizes as needed. This makes pulp tray packaging very suitable for daily use, adding sophistication and extra protection to products. Packaging materials can even be customized to millimeter precision to make full use of available resources.

　　Pulp molded packaging suppliers

　　2. The degradable and environmentally friendly nature of pulp molding

　　The use of pulp mould can reduce carbon footprint and alleviate environmental degradation. Since pulp molding products come from natural fibers and materials, they can be 100% recycled. Most importantly, it has no harmful or toxic ingredients. Even if it is dumped in a landfill, natural fibers are biodegradable and compostable. By using natural raw materials, it can help reduce carbon emissions and reverse the damage caused by plastics and other non-biodegradable waste.

　　3. The popularity index of pulp molding has increased year by year

　　Since the issuance of the plastic restriction order, as people’s awareness of environmental protection has increased, it has become an important part of the green packaging field. And it has become a popular choice for corporate customers who value the concept of circular development.

　　4. Pulp molding is cost-effective

　　Compared with traditional packaging, pulp molding products have sufficient raw material sources, pollution-free production and use processes, a wide range of applications, low cost, light weight, high strength, good plasticity, cushioning, interchangeability and other properties, and can be reused and recycled. Therefore, it has a strong application prospect, so pulp molding products are more affordable and cost-effective than traditional packaging.

　　pulp tray packaging

　　pulp tray packaging factory

　　5. Pulp molding provides protective properties

　　Pulp molding packaging can soften vibrations, cushion, block, support and support anything you are shipping, and the additional protection is superior to traditional packaging materials.

　　For example, fresh fruit cushioning packaging, in addition to its cushioning performance protection, can also prevent contact collisions and friction scratches between fruits, and can also emit “stuffy heat” to absorb moisture molecules and suppress “ethylene concentration”, especially in midsummer or tropical areas. Since pulp molding trays do not block heat absorption, they can absorb evaporated moisture, thereby preventing fresh fruits from rotting and deteriorating, playing a role that other packaging cannot play.

　　As an environmentally friendly and sustainable new material, pulp molding has a wide range of applicability and great development potential. In the application of industrial packaging, cultural and creative, gifts, daily necessities, agriculture, medical and catering, it has shown obvious environmental advantages and sustainable development characteristics.By switching to pulp molding packaging, we can effectively reduce dependence on limited resources, reduce energy consumption and greenhouse gas emissions, reduce environmental pollution, and contribute to sustainable development. In today’s emphasis on low carbon and sustainable development, the production and use of pulp molding has further promoted the sustainable development of society. Here are 5 reasons to switch to pulp molding packaging.among wet pressed molded pulp It has given great spiritual support to entrepreneurs, and more entrepreneurs will contribute to this industry in the future. https://www.pulptray.com/

　　1. Pulp molding has a wide range of uses

　　Pulp molding is easy to use and can be cast into various shapes and sizes as needed. This makes pulp tray packaging very suitable for daily use, adding sophistication and extra protection to products. Packaging materials can even be customized to millimeter precision to make full use of available resources.

　　Pulp molded packaging suppliers

　　2. The degradable and environmentally friendly nature of pulp molding

　　The use of pulp mould can reduce carbon footprint and alleviate environmental degradation. Since pulp molding products come from natural fibers and materials, they can be 100% recycled. Most importantly, it has no harmful or toxic ingredients. Even if it is dumped in a landfill, natural fibers are biodegradable and compostable. By using natural raw materials, it can help reduce carbon emissions and reverse the damage caused by plastics and other non-biodegradable waste.

　　3. The popularity index of pulp molding has increased year by year

　　Since the issuance of the plastic restriction order, as people’s awareness of environmental protection has increased, it has become an important part of the green packaging field. And it has become a popular choice for corporate customers who value the concept of circular development.

　　4. Pulp molding is cost-effective

　　Compared with traditional packaging, pulp molding products have sufficient raw material sources, pollution-free production and use processes, a wide range of applications, low cost, light weight, high strength, good plasticity, cushioning, interchangeability and other properties, and can be reused and recycled. Therefore, it has a strong application prospect, so pulp molding products are more affordable and cost-effective than traditional packaging.

　　pulp tray packaging

　　pulp tray packaging factory

　　5. Pulp molding provides protective properties

　　Pulp molding packaging can soften vibrations, cushion, block, support and support anything you are shipping, and the additional protection is superior to traditional packaging materials.

　　For example, fresh fruit cushioning packaging, in addition to its cushioning performance protection, can also prevent contact collisions and friction scratches between fruits, and can also emit “stuffy heat” to absorb moisture molecules and suppress “ethylene concentration”, especially in midsummer or tropical areas. Since pulp molding trays do not block heat absorption, they can absorb evaporated moisture, thereby preventing fresh fruits from rotting and deteriorating, playing a role that other packaging cannot play.

　　In today¨s fast-paced world, the need for quick and efficient charging solutions has become more critical than ever. As a result, fast charging technology has become a highly sought-after feature in modern power adapters. One common question among tech enthusiasts and everyday users alike is: “Does the 48W wall adapter support fast charging?” The answer is a resounding yes. Here, we delve into the details of how the 48W wall adapter supports fast charging and why it¨s an excellent choice for your power needs.Before that, international power adapter The market has also soared for a time, which has attracted the attention of a wide range of investors. https://www.jyh-electronic.com/

　　Understanding Fast Charging

　　Fast charging is a technology that allows devices to be charged at a much quicker rate compared to standard charging methods. This is achieved by increasing the power output delivered to the device, usually through higher voltage or current. Fast charging protocols such as Qualcomm Quick Charge, USB Power Delivery (USB-PD), and others have become standard in many modern devices, allowing them to recharge significantly faster.

　　Features of the 48W Wall Adapter

　　The 48W wall adapter is designed to deliver a substantial amount of power to a variety of devices efficiently and safely. Key features that make it compatible with fast charging include:

　　1. High Power Output:

　　The 48W rating indicates that this wall adapter can deliver up to 48 watts of power. This is more than sufficient for fast charging smartphones, tablets, and even some laptops that require higher power inputs.

　　2. Compatibility with Fast Charging Protocols:

　　The 48W wall adapter often supports multiple fast charging protocols such as USB-PD and Qualcomm Quick Charge. This versatility ensures that a wide range of devices can benefit from the faster charging speeds offered by the adapter.

　　3. Multiple Output Ports:

　　Many 48W wall adapters come with multiple output ports, including USB-A and USB-C. The USB-C port, in particular, is crucial for supporting USB Power Delivery, a common fast charging standard for modern devices.

　　4. Intelligent Power Distribution:

　　Advanced 48W wall adapters are equipped with smart power distribution technology. This allows the adapter to detect the power needs of the connected device and adjust the output accordingly, ensuring optimal charging speeds without overloading the device.

　　Benefits of Fast Charging with the 48W Wall Adapter

　　1. Time Efficiency:

　　One of the most significant benefits of fast charging is the reduced time it takes to charge your devices. With a 48W wall adapter, you can significantly cut down the charging time, allowing you to get back to using your device quickly.

　　2. Convenience:

　　For people constantly on the move, having a fast charging adapter means less downtime waiting for devices to charge. Whether you¨re traveling, at work, or at home, the 48W wall adapter ensures your devices are always ready to go.

　　3. Versatility:

　　The ability to charge a wide range of devices with a single adapter is a major convenience. The 48W wall adapter¨s compatibility with various fast charging protocols makes it a versatile tool in your tech arsenal.

　　4. Future-Proofing:

　　As more devices adopt fast charging technology, having a 48W wall adapter ensures that you are prepared for future tech advancements. It¨s an investment that keeps you equipped to handle new devices as they come to market.

　　Conclusion

　　The 48W wall adapter not only supports fast charging but does so with efficiency and versatility. Its high power output, compatibility with multiple fast charging protocols, and intelligent power distribution make it an excellent choice for anyone looking to charge their devices quickly and safely. Whether you need to charge your smartphone, tablet, or even a laptop, the 48W wall adapter is a reliable and future-proof solution that ensures your devices are always ready when you need them.

　　With the development of society, green packaging has gradually become a consensus of society. In recent years, the development of paper mold products equipment in my country has been very rapid and gradually mature. Pulp molded products have unique advantages in terms of raw materials and processes in the production process, which are more in line with the concept of sustainable development of mankind. Pulp molded products are currently involved in food, medical, household appliances, industrial building materials, agriculture and other fields. So, why should we replace pulp moulded packaging for products?In combination with these conditions, wet pressed molded pulp It can still let us see good development and bring fresh vitality to the whole market. https://www.pulptray.com/

　　1. Social development and global environmental protection attitude

　　According to data, the proportion of unrecycled plastic waste in the world is as high as 90.5%. Among such a huge amount of plastic waste, only 9% is recycled and only 12% is incinerated. Most of the remaining plastics will be landfilled on land or flow into the ocean, and it will take 400-500 years to degrade to become a substance that is harmless to nature and the food chain. It has been reported that a market basis should be provided for degradable tableware. In addition, the market demand for environmentally friendly packaging has increased, which has led major companies to continue looking for new packaging materials for sustainable development. Pulp molding, as a 100% plastic-free, fully degradable environmentally friendly product, has undoubtedly fundamentally solved the problem of plastic pollution.

　　2. Advantages of Pulp Molding Packaging

　　Pulp molding raw materials use plant fibers such as sugarcane bagasse and bamboo residue, which have the ability to be renewable in a short period of time. In addition to its own environmental protection, it does not require the felling of a tree. No chemicals are added during the pulping process. It is just water, recycled corrugated paper, waste paper scraps or newsprint. During the manufacturing process, it is a very friendly process for the protection of the earth’s environment, and no toxic or harmful materials will be introduced or discharged into the environment.

　　3. Paper and plastic products are degradable

　　All waste is returned to the pulp to achieve zero manufacturing waste. The final packaging is also 100% recyclable. Under normal circumstances, pulp moulded packaging products discarded in the open air within three months can be completely degraded and composted under natural conditions. It will not cause secondary pollution and industrial waste products. Protect the environment and eliminate white pollution!

　　4. Comparison with traditional packaging boxes

　　Traditional handmade boxes, iron boxes, and plastic boxes violate environmental protection requirements from the perspective of raw materials. Most of them contain harmful substances such as PVC and acrylonitrile. After being discarded, they will cause irreversible damage to the ecological environment. The world produces more than 300 million tons of plastic each year, of which about 2 million to 8 million tons of plastic will enter the ocean. These marine garbage also seriously affects the ecological environment of the seabed. The harm of plastic, iron boxes bring high carbon emissions, and wooden boxes cut down a large number of trees.

　　5. Enhance brand responsibility and values ??

　　From the perspective of product form, moulded pulp products gives more choices for packaging appearance. Traditional packaging cannot or is difficult to achieve various special-shaped boxes. The differentiated appearance has high-end attributes. This is also one of the important reasons why most international brands are willing to use pulp molding packaging. Because the packaging of the product can often reflect some of the attributes of the product itself. A packaging appearance that fits the product makes it easier for consumers to accept and understand the product performance. At the same time, pulp molding packaging can give the brand differentiated characteristics from the touch! The environmental protection characteristics also make it more popular.

　　It is not accidental that enterprises choose pulp molding packaging, but the trend of the times. Sustainable development is the real development! As people’s environmental awareness continues to increase, environmentally friendly packaging products will receive more and more attention in the future. According to quantitative evaluation by international authoritative experts, only paper is the most promising green packaging material.

　　The JYH23z Series 200W power adapter is designed with an emphasis on safety and reliability, making it a trusted choice for powering various electronic devices. Ensuring the protection of both the power adapter and the connected devices, it incorporates multiple safety features. Here¨s a closer look at the key safety features included in the JYH23z Series 200W power adapter:In order to grow rapidly, international power adapter Do not hesitate to change the strategy and rearrange the products, so as to obtain unexpected results. https://www.jyh-electronic.com/

　　1. Overcurrent Protection

　　Overcurrent protection is a crucial safety feature that prevents the power adapter from supplying excessive current to connected devices. This feature ensures that the current flowing through the adapter does not exceed a safe limit. If an overcurrent situation occurs, the adapter automatically shuts down to prevent damage to both the adapter and the device it is powering. This helps in safeguarding sensitive electronic components from potential damage due to excessive current flow.

　　2. Overvoltage Protection

　　Overvoltage protection prevents the adapter from delivering voltage higher than the specified level to the connected device. Excessive voltage can cause significant damage to electronic components, potentially leading to device failure. The overvoltage protection feature in the JYH23z Series 200W power adapter ensures that the output voltage remains within safe limits, thereby protecting the connected devices from any harmful voltage spikes.

　　What Safety Features are Included in the JYH23z Series 200W Power Adapter?(夕1)

　　3. Short Circuit Protection

　　Short circuit protection is designed to protect both the power adapter and the connected devices from the dangers of a short circuit. A short circuit can occur due to various reasons, such as damaged wiring or faulty components, leading to an unintended path for the electrical current. The JYH23z Series 200W power adapter detects short circuit conditions and immediately cuts off the power supply to prevent damage and potential fire hazards. This feature ensures the safety of the entire electrical setup.

　　4. Overtemperature Protection

　　Overtemperature protection ensures that the power adapter operates within a safe temperature range. Excessive heat can degrade the performance of electronic components and even cause them to fail. The JYH23z Series 200W power adapter includes thermal sensors that monitor the internal temperature. If the temperature exceeds a safe threshold, the adapter automatically reduces the output power or shuts down completely to prevent overheating. This feature extends the lifespan of the adapter and the connected devices by preventing thermal damage.

　　5. Safety Certifications

　　In addition to the built-in safety features, the JYH23z Series 200W power adapter also meets various international safety standards and certifications. These certifications are a testament to the rigorous testing and quality assurance processes that the adapter undergoes. Certifications such as UL, CE, and FCC ensure that the adapter complies with safety regulations and is safe for use in different regions around the world.

　　Conclusion

　　The JYH23z Series 200W power adapter stands out not only for its performance but also for its comprehensive safety features. Overcurrent protection, overvoltage protection, short circuit protection, and overtemperature protection work together to ensure the safe operation of the power adapter and the devices it powers. Additionally, the adherence to international safety standards provides an extra layer of assurance to users. Whether for personal or professional use, the JYH23z Series 200W power adapter offers a reliable and safe power solution for a wide range of electronic applications.

　　In our daily lives, we often use a variety of packaging materials. However, with the improvement of environmental awareness, we need to consider how to choose more sustainable packaging methods. As an emerging green and environmentally friendly product, pulp molded packaging is widely used in the fields of medical, agriculture, electronic products, and catering food. At the same time, against the backdrop of soaring prices of packaging paper and mature 3D mold printing technology, pulp molded packaging has emerged in the field of design. Converting plastic packaging to pulp molded packaging can not only reduce plastic pollution, but also help us develop new sustainable habits.More importantly, put wet pressed molded pulp It is imperative for us to make thorough analysis and maximize its social function. https://www.pulptray.com/

　　Wet press molded pulp supplier

　　1. Environmental advantages of pulp molding

　　Pulp molding raw materials use plant fibers such as sugarcane bagasse and bamboo residue, which have the ability to be renewable in a short period of time. In addition to its own environmental protection, it does not require the felling of a tree. No chemicals are added during the pulping process. It is just water, recycled corrugated paper, waste paper scraps or newsprint. During the manufacturing process, it is a very friendly process for the protection of the earth’s environment, and no toxic or harmful materials are introduced or discharged into the environment. At the same time, the amount of raw materials used is much lower than that of traditional gift boxes such as handmade boxes, and the carbon emissions are lower. By comparison, it is found that for gift boxes of the same size, the amount of raw materials used in pulp molding is only half of that of traditional gift boxes.Moreover, when the packaging is recycled, all waste is returned to the pulp to achieve zero manufacturing waste. The final packaging is also 100% recyclable. Under normal circumstances, pulp molded products discarded in the open air within three months can be completely degraded and composted under natural conditions. No secondary pollution or industrial waste will be generated. Protect the environment and eliminate white pollution!

　　wet pressed cosmetic molded pulp trays

　　Moulded pulp sugarcane

　　2 . Brand advantages of pulp molding

　　From the form of the product, pulp molding gives more choices for packaging appearance. Traditional packaging cannot or is difficult to achieve various special-shaped boxes. The differentiated appearance has high-end attributes. This is also one of the important reasons why most international brands are willing to use molded pulp packaging. Because the packaging of the product can often reflect some of the attributes of the product itself. A packaging appearance that fits the product makes it easier for consumers to accept and understand the product performance. At the same time, pulp molding packaging can give the brand differentiated characteristics from the touch! The environmentally friendly characteristics also make him more popular.

　　Moreover, molded pulp packaging can be made into special-shaped boxes due to its characteristics. Not only that, the outer packaging process selection is more diverse, including hot stamping, UV, high-definition, envelopes, embossing, etc., giving your designers unlimited possibilities. At the same time, compared with the complicated and cumbersome production process of traditional packaging, pulp molding products are molded in one piece and fully automatic production is achieved by machines, which can save labor costs to the greatest extent and improve production efficiency. In the future, the cost of pulp molding packaging will be much lower than traditional packaging!

　　Pulp molding packaging stands out as a leader in environmental protection, offering a range of benefits that align with the growing emphasis on sustainability. By utilizing 100% recycled materials, reducing carbon emissions, and providing versatile and durable packaging solutions, pulp molding is paving the way for a greener future. For businesses committed to reducing their environmental impact while maintaining high standards of performance, pulp molding packaging is an exceptional choice.

　　Power adapters are essential for our electronic devices, but issues can arise. Understanding how to troubleshoot these problems can save time and money. This guide, provided by experts from a custom made power adapter factory, focuses on common issues and their solutions. Whether you use a JYH customized power adapter or other electronic device power connectors, these tips will help.From the demand side, custom power adapter supplier More in line with the psychological expectations of consumers, willing to pay for the things they like. https://www.jyh-electronic.com/

　　Identifying Common Power Adapter Issues:

　　1. No Power:

　　When your device isn¨t receiving power, it can be frustrating. First, ensure the power outlet works by testing it with another device. Next, inspect the power adapter for any visible damage. If using a JYH customized power adapter, check the specifications to ensure compatibility with your device.

　　2. Intermittent Power:

　　If your power adapter connects and disconnects sporadically, it might be due to a loose connection. Examine the electronic device power connector for any debris or damage. Custom made power adapter factory products often come with durable connectors, but they can still wear out over time.

　　3. Slow Charging:

　　Slow charging can be caused by several factors, including a weak power source or an underpowered adapter. Verify that your adapter meets the power requirements of your device. JYH customized power adapters are designed to provide optimal charging speeds, but compatibility is key.

　　4. Overheating:

　　Overheating can be a sign of a faulty adapter or a device drawing too much power. Ensure your power adapter is placed in a well-ventilated area. Custom made power adapter factory models typically include safety features to prevent overheating, but it¨s still important to monitor.

　　5. Adapter Not Recognized:

　　Sometimes, devices may not recognize the power adapter. This can happen if the adapter¨s output is incompatible with the device¨s input requirements. Check your JYH customized power adapter¨s specifications and compare them with your device¨s needs.

　　How to Troubleshoot Common Power Adapter Issues: A Guide by JYH Customized Power Adapter Experts(夕2)

　　Solutions and Preventive Measures:

　　1. Regular Maintenance:

　　Keep your power adapters and electronic device power connectors clean and free from dust and debris. Regularly inspect cables for signs of wear and tear.

　　2. Use Compatible Adapters:

　　Always use power adapters that match the power requirements of your devices. Custom made power adapter factory products are designed for specific devices, ensuring optimal performance.

　　3. Avoid Overloading:

　　Do not use power adapters with devices that require more power than the adapter can provide. This can cause overheating and potential damage to both the adapter and the device.

　　4. Proper Storage:

　　Store power adapters in a cool, dry place. Avoid wrapping cables tightly around the adapter, as this can cause the wires to weaken and break.

　　Conclusion:

　　By following these troubleshooting tips and preventive measures, you can ensure the longevity and performance of your power adapters. Whether you use a JYH customized power adapter or products from a custom made power adapter factory, proper care and maintenance are essential. Keep your electronic device power connectors in good condition, and enjoy uninterrupted power for your devices.