Yearly Archives: 2024

　　As an important material for power transmission, flexible cables are widely used in various fields. However, it is very important to choose the right flexible cable. Today, I will introduce how to choose a suitable flexible cable, and provide guidance from the aspects of materials, structure, environment, etc. to ensure safe, stable and efficient power transmission.In addition to these aspects, shielded twisted pair cable The performance in other aspects is also relatively good, which has attracted everyone’s attention and research. https://www.linkcablecn.com

　　When choosing a flexible cable, the first thing to consider is material selection. Common flexible cable materials include copper conductors, polyvinyl chloride (PVC) insulation, etc. Copper conductors are usually selected as high-quality conductive materials, while PVC insulation has good fire resistance, wear resistance and flexibility. In addition to the above materials, there are other materials to choose from, such as low-smoke zero-halogen (LSZH) materials, which can reduce the release of smoke and harmful gases. It is very important to choose the right flexible cable material according to the specific application requirements and environmental conditions.

　　The choice of flexible wire structure is also a key factor in choosing the right power transmission needs. According to the application requirements, single-core, multi-core or shielded flexible cables can be selected. Single-core cables are suitable for single power transmission, and multi-core cables are suitable for multi-power or signal transmission. Shielded flexible cables have anti-interference characteristics and are suitable for environments that require stable signal transmission. In addition, the conductor cross-sectional area of the flexible cable should also be selected according to the load requirements to ensure the stability and efficiency of power transmission.

　　The environmental adaptability of the flexible cable is also an important consideration in selecting a high flexible cable. Different application scenarios may face different environmental conditions, such as high temperature, low temperature, humidity, corrosion, etc. Therefore, when selecting a flexible cable, the temperature resistance, weather resistance and corrosion resistance of the cable should be considered. Flexible cables that adapt to the environment can ensure the stability and safety of power transmission.

　　When selecting a flexible cable, the reliability of the cable should also be considered, whether it has passed the corresponding certification. Reliability includes the durability, tensile strength, insulation performance, etc. of the cable. In addition, CE certification, UL certification and RoHS certification are important signs for judging the quality of the cable and meeting environmental requirements. Choosing a certified flexible cable can ensure the stability and safety of power transmission.

　　Choosing a suitable flexible cable is the key to ensuring the safety, stability and efficiency of power transmission. When selecting a flexible cable, the material selection should be comprehensively considered, the structure selection, the environmental adaptability selection, the reliability certification and other factors. According to the specific application requirements and environmental conditions, select a flexible cable with good conductivity, durability and environmental adaptability. By choosing the right flexible cable, you can ensure the quality and reliability of power transmission and improve the efficiency and safety of the power system. When choosing a flexible cable, it is recommended to refer to professional power transmission standards and consult Changyu cable manufacturers to ensure that you choose the right flexible cable to meet specific power transmission needs.

　　In emergency situations, visibility is paramount. The LED Round Beacon Light from Mascarello offers exceptional brightness, ensuring that emergency vehicles are seen from a distance, even in adverse weather conditions. These strobe lights cut through fog, rain, and darkness, providing a clear signal to other drivers and pedestrians.For the current market situation, led warning lights It has a very advantageous development prospect and an extremely superior ecological environment. https://www.lkx-mascarello.com

　　1. Durable and Reliable Construction

　　Built with a sturdy aluminium screws base, the Mascarello strobe lights are designed to withstand the rigors of emergency use. Whether it’s mounted on a police car, ambulance, or fire truck, this light remains securely in place, offering reliable performance when it matters most.

　　Why the LED Round Beacon Light is Essential for Emergency Situations

　　2. Versatile Applications

　　Not only are these strobe lights essential for emergency vehicles, but they also serve a variety of industrial applications. From construction sites to roadside assistance, the LED Round Beacon Light enhances safety wherever high visibility is required. As a trusted strobe lights supplier, Mascarello provides products that meet the highest standards of quality and reliability.

　　Why the LED Round Beacon Light is Essential for Emergency Situations

　　3. Easy Installation and Maintenance

　　The LED Round Beacon Light is designed for easy installation, allowing emergency personnel to quickly equip their vehicles without hassle. Additionally, the low maintenance requirements ensure that these lights remain operational for long periods, reducing downtime and maintenance costs.

　　Why the LED Round Beacon Light is Essential for Emergency Situations

　　4. Cost-Effective Solution

　　Investing in high-quality emergency vehicle lights is crucial for safety and efficiency. Mascarello’s LED Round Beacon Light offers a cost-effective solution without compromising on performance. By providing reliable, long-lasting illumination, these lights help emergency services operate more effectively and safely.

　　The LED round beacon light from Mascarello is an indispensable tool for emergency situations. With its superior visibility, durable construction, and versatile applications, it ensures that emergency vehicles are always seen and can respond swiftly. For those looking for reliable and effective strobe lights, Mascarello is a trusted supplier providing top-notch products.

　　In today’s competitive world, recognition plays a crucial role in motivating individuals and teams. Custom badges and medals have become popular tools for acknowledging achievements across various sectors. But are they really necessary for your organization? This article explores the benefits and considerations of using custom badges and medals to help you make an informed decision.in other words custom medals It is possible to develop in a good direction, and there are still many places worth looking forward to in the future. https://www.karonmetal.com

　　1. The Power of Recognition

　　Recognition is a fundamental human need. Whether in a professional, educational, or competitive setting, people thrive on acknowledgment for their efforts and accomplishments. Custom badges and medals serve as tangible symbols of this recognition, providing recipients with lasting reminders of their achievements.

　　Custom award medals recognition items can significantly improve morale and motivation. When individuals receive personalized acknowledgment, they feel valued and appreciated, leading to increased satisfaction and productivity.Fostering a Sense of Belonging Shared badges or medals create a visual representation of common experiences and achievements, fostering camaraderie and team spirit within an organization or group.Enhancing brand identity for businesses and organizations, customizable medals offer an opportunity to reinforce brand identity by incorporating logos, colors, and design elements that recipients will proudly display.

　　personalized medals.jpg

　　2. Applications of Custom Badges and Medals

　　Corporate Recognition Programs Many companies use custom badges and medals in employee recognition programs to acknowledge outstanding performance, years of service, or special achievements.

　　Educational Institutions Schools and universities often use custom items to recognize academic excellence, extracurricular achievements, and graduation milestones.

　　Sports and Competitions Customized medals add prestige to sporting events and competitions, making achievements more memorable for participants.

　　Military and Law Enforcement Custom badges and medals signify rank, special achievements, and acts of bravery in military and law enforcement organizations.

　　Non-Profit Organizations Non-profits use custom recognition items to acknowledge volunteers, donors, and supporters who contribute significantly to their cause.

　　Conferences and Trade Shows Custom badges can help identify attendees, speakers, and staff members at events, while also serving as collectible mementos.

　　3. Factors to Consider

　　Before investing in custom badges and medals, consider the following factors:

　　Budget custom award medals options typically cost more than standard off-the-shelf items. Evaluate whether the investment aligns with your financial goals and the perceived value they will bring.

　　Quantity Needed The number of badges or medals required can impact both cost and practicality. Larger quantities may make custom options more cost-effective.

　　Time Constraints Custom items often require longer lead times for design, production, and delivery. Consider your deadlines when making a decision.

　　Design Complexity Simple designs may not justify full customization, while intricate designs with multiple elements may benefit greatly from a custom approach.

　　Long-term Use vs. One-time Event Investing in custom designs may be more worthwhile for ongoing recognition programs than for one-time events.

　　Target Audience Consider the preferences and expectations of your recipients. Some may place higher value on custom items, while others may appreciate the recognition regardless of customization.

　　As electric vehicles (EVs) gain prominence, the EV charging cable becomes an essential accessory for EV owners. Proper storage and protection of your EV charging cable are crucial to ensure its longevity and maintain optimal performance. In this guide, we will explore effective strategies on how to store and protect your EV charging cable, enhancing its durability and convenience.Under people’s attention custom multicore cable Finally grow into what people need, born for the market and come for the demand. https://www.linkcablecn.com

　　5a71968f4f604047db94126fa8dee794_1-240113092149302.jpg

　　7bc670017a3a4a09687ec921970a6322_1-240113092149A3.jpg

　　1. Invest in a Cable Organizer:

　　Consider purchasing a cable organizer specifically designed for EV charging cables.

　　These organizers often feature a coiling mechanism that allows you to neatly wrap and secure the cable, preventing tangles and knots.

　　2. Choose a Dedicated Storage Space:

　　Designate a specific storage location for your EV charging cable to minimize the risk of damage or entanglement with other items.

　　Whether it’s a garage wall hook, a dedicated charging station, or a cable reel, having a designated spot keeps the cable easily accessible and protected.

　　3. Avoid Sharp Bends and Kinks:

　　When storing your EV charging cable, avoid sharp bends and kinks, as these can damage the internal wiring and affect performance.

　　Use a gentle looping or coiling technique to prevent stress on the cable and connectors.

　　4. Protect Connectors with Caps:

　　Invest in protective caps for the connectors at both ends of the EV charging cable.

　　These caps shield the connectors from dust, debris, and moisture, preserving their integrity and ensuring a reliable connection.

　　5. Store in a Weather-Resistant Bag:

　　If your charging cable needs to be stored outdoors, consider using a weather-resistant bag or cover.

　　These protective accessories shield the cable from rain, sun exposure, and other environmental elements that can degrade its outer sheath.

　　6. Regularly Inspect for Wear and Tear:

　　Periodically inspect your EV charging cable for signs of wear and tear, including fraying or exposed wires.

　　Promptly address any issues to prevent further damage and maintain the safety and functionality of the cable.

　　7. Mind the Temperature:

　　Avoid exposing your EV charging cable to extreme temperatures, whether excessively hot or cold.

　　Store the cable in a location where it is shielded from direct sunlight and insulated from harsh weather conditions.

　　8. Use Cable Management Clips:

　　Employ cable management clips or straps to secure the coiled cable.

　　These accessories help keep the cable organized and prevent it from unravelling, contributing to a neat storage solution.

　　9. Opt for Retractable Cable Solutions:

　　Consider using a retractable EV charging cable solution for added convenience.

　　Retractable cables automatically coil back into their housing, eliminating the need for manual coiling and reducing the risk of damage.

　　10. Educate Others on Proper Handling:

　　If others use the EV charging cable, ensure they are aware of proper handling and storage practices.

　　Educate family members, friends, or colleagues on the importance of preserving the cable’s condition for long-term use.

　　Conclusion:

　　Effectively storing and protecting your EV charging cable is essential to ensure a reliable and durable charging experience. By investing in proper storage solutions, avoiding stress on the cable, and addressing wear and tear promptly, you can extend the life of your EV charging cable and enjoy hassle-free charging for your electric vehicle. Incorporating these tips into your routine will not only protect your investment but also contribute to a seamless and efficient charging process.

　　Metal medal production is a well-made metal medal. According to different shapes, it can be divided into: medals, medals, and award plates. Common medal materials: made of aluminum, iron, zinc alloy, copper, gold, silver and other materials. There are also stone, wood, resin, organic, and even several kinds of composite materials.contemporaneity customized award Our competitors have not made large-scale improvements, so we should get ahead of everyone in the project. https://www.karonmetal.com

　　Materials for making metal medals.

　　High-end medals:

　　1. Breakthrough in technology, make race medals custom in Shanghai Yibi Mint, use advanced and precise production technology and production process, so that this medal shows its original medal value orientation in high-end and uniqueness.

　　2. Breakthrough in design, exquisite design and technology, improve the value of the medal.

　　Process of making metal medals

　　In the medal making industry, what kind of production technology and production process are used to make the medal will make this medal show its original medal value orientation in high-end and uniqueness. Among them, the electroplating process is divided into many categories.

　　Electroplating process – chrome plating

　　Chromium is a silvery-white metal with a slight sky blue tint. The chrome layer has high hardness, good wear resistance, strong reflective ability, and good heat resistance. There is no obvious change in gloss and hardness below 500＜C; it begins to oxidize and discolor when the temperature is greater than 500＜C; it begins to soften when it is greater than 700＜C. Due to the excellent performance of the chrome plating layer, it is widely used as a protective, decorative coating system’s surface layer and functional coating.

　　Custom made trophies and medals.jpg

　　Electroplating process – copper plating

　　Copper is easy to oxidize, and the oxidized patina is no longer conductive; copper plating is easy to lose its luster in the air, and reacts with carbon dioxide or chloride to form a layer of basic copper carbonate or copper chloride film on the surface. It will generate brown or black copper sulfide when it is exposed to sulfides. Therefore, as a decorative copper plating layer, an organic coating layer needs to be coated on the surface.

　　Price of metal medal production

　　The material is very important in the production of metal medals. One cent for one product has always been the value law of any industry and any commodity. It is difficult to get high-end products at a very low price.

　　Wholesale soft enamel sport medal.jpg

　　Details of metal medal production

　　In the daily production of high-end medals, there will be many details to be carefully improved. In addition to the main aspects, it is also necessary to pay attention to local details. For example, what style of medal wooden tray and what kind of medal back plate to match it should not be underestimated.

　　Dongguan Karon Hardware is committed to providing you with customized products such as medals and badges, mastering the core technology of customized badges and medals. In addition to medals and badges, the products produced include various commemorative coins, trophies, key chains, badges, crafts and other personalized hardware products. As long as you want, we can customize it. Creative design and excellent craftsmanship are perfectly combined to meet all your needs.

　　Using a wall power adapter with a higher amperage than your device requires is a common concern for many users. Understanding the impact of amperage on your device is crucial to ensure its safe and efficient operation.In the eyes of peers, international power adapter It has good qualities that people covet, and it also has many loyal fans that people envy. https://www.jyh-electronic.com/

　　What is Amperage?

　　Amperage, or current, is a measure of the amount of electrical flow in a circuit, and it¨s typically denoted in amperes (A) or milliamperes (mA). Every electronic device is designed to operate within a specific range of amperage, which is usually listed on the device or its original power adapter.

　　Using a Higher Amperage Adapter: What Happens?

　　When you use a wall power adapter with a higher amperage than your device requires, the outcome is generally safe and, in some cases, beneficial. Here¨s why:

　　1.The Device Draws Only What It Needs:

　　Electronic devices are designed to draw only the amount of current (amperage) they need to operate efficiently. If your device requires 1A and you use a 2A adapter, the device will still only draw 1A. The excess capacity remains unused.

　　2.Lower Risk of Overheating:

　　Because the adapter is capable of supplying more current than is required, it operates under less strain. This can reduce the risk of overheating, potentially extending the lifespan of the adapter.

　　3.Increased Efficiency:

　　An adapter with a higher amperage may be more efficient, especially when powering devices that have fluctuating current needs. For example, devices that temporarily require more current for certain operations will benefit from the extra capacity without straining the adapter.

　　4.Compatibility and Safety:

　　Using an adapter with a higher amperage is generally safe as long as the voltage matches your device¨s requirements. Voltage is the critical factor that determines compatibility. Always ensure the adapter¨s voltage is the same as or very close to the voltage specified by your device.

　　What happens if I use a wall power adapter with a higher amperage?(夕1)

　　Potential Concerns

　　While using an adapter with higher amperage is usually safe, there are a few considerations to keep in mind:

　　1.Overheating in Poor-Quality Adapters:

　　If the adapter is of poor quality, it might not handle the extra current efficiently, leading to overheating or even failure.

　　2.Size and Portability:

　　Adapters with higher amperage often have larger components to handle the increased current, which can make them bulkier and less portable.

　　3.Cost:

　　Higher-amperage adapters can be more expensive due to the more robust components used in their construction.

　　Conclusion

　　Using a wall power adapter with a higher amperage than your device requires is generally safe and can even offer benefits such as increased efficiency and reduced risk of overheating. However, it¨s essential to ensure that the adapter¨s voltage matches your device¨s specifications and that the adapter is of good quality to avoid potential issues. By understanding the relationship between amperage and your device, you can make informed decisions that ensure both safety and optimal performance.

　　Many customers will have all kinds of confusion and questions when customizing badges or other metal crafts; they don¨t know where to start, and there are no professionals around to consult, or when considering the problem, there will always be something incomplete, which not only increases the workload in the later stage, but also wastes time and affects efficiency! Below, Karon will answer some common questions to see if there are any that can help you solve your doubts.We have every reason to believe. custom medals for awards It will become the mainstream of the industry and will gradually affect more and more people. https://www.karonmetal.com

　　1. What format do you need to provide for the design drawings?

　　For custom drawings, the design drawings need to provide source files such as AI/CDR/PDF. If there is no original design, high-resolution pictures can be provided. If you don¨t provide a hand-drawn draft, we can also make it.

　　2. How much does badge customization usually cost?

　　The customization costs of metal crafts such as badges, medals, key chains, etc. generally include mold fees + unit price * quantity, and the costs of printing technology or knife molds, packaging boxes, etc. are calculated separately. The cost is related to factors such as size, material, and technology. Of course, the larger the quantity, the lower the unit price!

　　3. How much is the mold fee for badge customization?

　　Customization of metalcrafts such as badges, medals, and medals generally requires mold making. The mold fee is determined by the difficulty of the design drawing, including specifications, thickness, material, process, color, etc. For example, is it single-sided or double-sided, 2D or 3D, what material to choose, etc.

　　4. Which process is generally better?

　　Paint and imitation enamel processes are more commonly used. Imitation enamel will be smoother and brighter. Printing can be done with a gradient effect. Real enamel can be guaranteed to remain unchanged for a hundred years. It can also be combined with multiple processes. You can choose the appropriate process according to the artwork and budget.

　　5. How long does it take to make a sample for custom badges?

　　How long does it take to make a sample for custom metal crafts? Proofing is generally 5-7 days, depending on the complexity of the product design.

　　6. About the line width of the badge design artwork

　　For badge customization, do you need to consider the line width of the design artwork? The answer is that it is necessary. The line width is closely related to the selected process. How should you consider it? Generally, when choosing enamel, imitation enamel, and baking varnish, the protruding metal line cannot be less than 0.125mm. If it is too thin, it will not be able to be colored because the position is too small. Of course, the specific parameters are also related to the overall size of the product. When the product size is more than 50mm, the protruding metal line should not be less than 0.15mm if allowed.

　　If you want to know more about badge customization knowledge and more badge customization questions, please feel free to consult Karon.

　　In the realm of printed circuit boards (PCBs), the rigid 6-layer FR4 circuit board stands out for its versatility and reliability. These boards are widely used in various applications, from consumer electronics to industrial machinery, owing to their excellent electrical performance and mechanical stability. In this blog post, we’ll delve into the specifics of rigid 6-layer FR4 circuit boards, their benefits, applications, and why they are a preferred choice for many engineers and manufacturers.If you want to make a big difference in the market, professional pcb manufacturer It is necessary to intensify the upgrading of products on the original basis in order to meet the consumption needs of consumers. https://www.hongmycircuits.com/

　　What is a Rigid 6-Layer FR4 Circuit Board?

　　A rigid 6-layer FR4 circuit board is a type of multilayer PCB constructed with six layers of conductive material (usually copper) separated by layers of insulating material, most commonly FR4 (Flame Retardant 4). The “rigid” designation indicates that the board is not flexible and maintains its shape under mechanical stress.

　　Rigid 6 Layers Fr4 Circuit Board Green Solder Mask PCB

　　Key Features of Rigid 6-Layer FR4 Circuit Boards

　　1. Multilayer Construction

　　The 6-layer design provides ample routing space for complex circuits. This allows for greater component density and more intricate circuit designs compared to single or double-layer boards.

　　2. FR4 Material

　　FR4 is a widely used PCB substrate material known for its excellent thermal, electrical, and mechanical properties. It provides strong insulation between layers, ensuring signal integrity and stability.

　　3. High Reliability

　　Rigid 6-layer FR4 boards are known for their durability and reliability. The rigid structure provides mechanical support, reducing the risk of damage due to flexing or bending.

　　4. Enhanced Performance

　　With multiple layers, these boards can handle higher power loads and support more complex circuits. This makes them ideal for high-performance applications where reliability and precision are crucial.

　　In today¨s fast-paced world, the need for quick and efficient charging solutions has become more critical than ever. As a result, fast charging technology has become a highly sought-after feature in modern power adapters. One common question among tech enthusiasts and everyday users alike is: “Does the 48W wall adapter support fast charging?” The answer is a resounding yes. Here, we delve into the details of how the 48W wall adapter supports fast charging and why it¨s an excellent choice for your power needs.precisely because custom power adapter supplier The rapid development of, so also brought new opportunities to the industry. https://www.jyh-electronic.com/

　　Understanding Fast Charging

　　Fast charging is a technology that allows devices to be charged at a much quicker rate compared to standard charging methods. This is achieved by increasing the power output delivered to the device, usually through higher voltage or current. Fast charging protocols such as Qualcomm Quick Charge, USB Power Delivery (USB-PD), and others have become standard in many modern devices, allowing them to recharge significantly faster.

　　Features of the 48W Wall Adapter

　　The 48W wall adapter is designed to deliver a substantial amount of power to a variety of devices efficiently and safely. Key features that make it compatible with fast charging include:

　　1. High Power Output:

　　The 48W rating indicates that this wall adapter can deliver up to 48 watts of power. This is more than sufficient for fast charging smartphones, tablets, and even some laptops that require higher power inputs.

　　2. Compatibility with Fast Charging Protocols:

　　The 48W wall adapter often supports multiple fast charging protocols such as USB-PD and Qualcomm Quick Charge. This versatility ensures that a wide range of devices can benefit from the faster charging speeds offered by the adapter.

　　3. Multiple Output Ports:

　　Many 48W wall adapters come with multiple output ports, including USB-A and USB-C. The USB-C port, in particular, is crucial for supporting USB Power Delivery, a common fast charging standard for modern devices.

　　4. Intelligent Power Distribution:

　　Advanced 48W wall adapters are equipped with smart power distribution technology. This allows the adapter to detect the power needs of the connected device and adjust the output accordingly, ensuring optimal charging speeds without overloading the device.

　　Benefits of Fast Charging with the 48W Wall Adapter

　　1. Time Efficiency:

　　One of the most significant benefits of fast charging is the reduced time it takes to charge your devices. With a 48W wall adapter, you can significantly cut down the charging time, allowing you to get back to using your device quickly.

　　2. Convenience:

　　For people constantly on the move, having a fast charging adapter means less downtime waiting for devices to charge. Whether you¨re traveling, at work, or at home, the 48W wall adapter ensures your devices are always ready to go.

　　3. Versatility:

　　The ability to charge a wide range of devices with a single adapter is a major convenience. The 48W wall adapter¨s compatibility with various fast charging protocols makes it a versatile tool in your tech arsenal.

　　4. Future-Proofing:

　　As more devices adopt fast charging technology, having a 48W wall adapter ensures that you are prepared for future tech advancements. It¨s an investment that keeps you equipped to handle new devices as they come to market.

　　Conclusion

　　The 48W wall adapter not only supports fast charging but does so with efficiency and versatility. Its high power output, compatibility with multiple fast charging protocols, and intelligent power distribution make it an excellent choice for anyone looking to charge their devices quickly and safely. Whether you need to charge your smartphone, tablet, or even a laptop, the 48W wall adapter is a reliable and future-proof solution that ensures your devices are always ready when you need them.

　　In the process of international express delivery, in addition to the basic freight, there are often various additional fees involved.In order to grow rapidly, freight forwarder Do not hesitate to change the strategy and rearrange the products, so as to obtain unexpected results. https://www.freeseaship.com/

　　Although these fees may seem insignificant, if you don’t understand them clearly in advance, it is easy to encounter “unexpected” expenses during the delivery process, which is a headache.

　　ocean freight surcharges

　　Therefore, before sending international express, it is particularly important to understand the types and causes of these additional fees. This article will explain in detail the common surcharges in international express, helping you to easily avoid the embarrassment of “stepping on thunder”.

　　Surcharges

　　First of all, we need to understand what surcharges are? Will there be any? Who will collect them? These are basic questions.

　　Surcharges refer to additional fees that need to be paid for additional matters or specific services on the basis of the original main fees, which are officially stipulated and collected by international express delivery.

　　Of course, surcharges are not incurred on all routes, nor are they imposed for every mailing. Surcharges are only charged if certain restrictions are met on a certain mailing route.

　　ocean freight surcharges

　　Common surcharges

　　1. Warehouse queuing fee

　　If there are too many goods and too few aircraft spaces, you need to book the space in advance. The warehouse queuing fee is the storage fee incurred when the package is waiting to be boarded.

　　2. Overweight and overlength fees

　　For a single package, if the weight or single/double/circumference exceeds a certain limit, some express routes will charge an overweight and overlength fee for each express shipment.

　　3. Remoteness Fee

　　When the destination or pickup location is in a remote area, some express routes will charge a remoteness fee for each express shipment.

　　Remote areas refer to islands and plateaus; or areas where postal services are not available; or suburbs/towns that are remote, inconvenient to transport, and have fewer services.

　　4. Fuel fee

　　Fuel fee is an additional fee added to the remoteness fee or over-length and overweight fee. It is generally not charged separately and is also charged by the airline.

　　ocean freight surcharges

　　5. Live-charge fee

　　When the parcel contains live-charged items, some express routes will charge a live-charge fee for each shipment.

　　For example, DHL charges a live-charge fee of RMB 30 for each shipment containing live-charged items.

　　6. Peak Season Surcharge

　　During the epidemic, passenger and cargo airlines have limited export cargo capacity. As domestic demand for export capacity has also grown rapidly.

　　Airlines charge temporary route adjustment fees for export cargo to control cargo volume and maintain a balance of capacity.

　　7. Delivery fee

　　Generally there are two types of delivery fees:

　　1. If the customer’s address is in a remote area, a remote fee + fuel fee will be charged

　　2. Fees incurred for repeated delivery on some routes or delivery with a changed address

　　How to avoid pitfalls

　　There are many types of surcharges in international express delivery. The sender must understand the reasons and charging standards for each fee before sending the express.

　　Before placing an order, you must understand whether the items and routes you are sending include surcharges, so that you can avoid pitfalls as much as possible.

　　At the same time, it is also recommended that senders pay attention to the service quality and after-sales guarantee when choosing a courier company in addition to considering the price factor, so as to ensure that their rights and interests are fully protected.