The price of watch maintenance and repair is actually not high!Therefore, we should understand copy watches Many benefits, absorb and summarize, and use them. http://www.316watches.com/

　　Many people think that the price of maintenance and repair of famous watches is high, and the total service fee is several thousand yuan, but in fact, compared with the value of famous watches themselves, the maintenance and repair price is reasonable and not high.

　　First of all, the watch itself is the crystallization of exquisite craftsmanship, and its internal structure is complex and fine. Maintenance and repair require highly professional skills and knowledge, and watchmakers can only be competent after long-term training and experience accumulation. The training cost of such professionals is extremely high, and their technical value is reflected in the cost of maintenance.

　　Moreover, the materials used in famous watches are often of high quality, such as special metals and precious stones. In the process of maintenance and repair, it is necessary to ensure the use of high-quality parts and materials to maintain the quality and performance of famous watches, which itself requires a certain cost.

　　Moreover, the maintenance of famous watches is not only a simple repair, but also a careful care of their overall state. This includes careful inspection, debugging and optimization to ensure that the watch can run accurately for a long time. This kind of all-round service is to make famous watches continue to show their excellent quality, and in the long run, it is a guarantee for the value of famous watches.

　　Only when the important parts of the watch, such as the case and the dial inlaid with precious stones, are damaged will it lead to higher maintenance costs.

　　Shihui Watch Service Center can repair the original watch case and dial that need to be replaced, greatly reducing the maintenance cost, and at the same time ensuring that every maintenance reaches a high standard.

　　Compared with the value of the watch itself and the long-term use experience and pleasure it can bring, the appropriate maintenance cost is totally worth it.

　　What will happen after Audemars Piguet 01? Of course, it is [replica ” target=_blank>02.From some points of view, replica watches It is the core driving force to better promote the rapid development of the surrounding markets. http://www.316watches.com/

　　However, what will this second reinterpreted timepiece look like? Completely out of everyone’s expectation.

　　Audemars Piguet did not choose the trend of comfort and retro, but went to asymmetric design. [Duplicate ” target=_blank>02 Self-winding wristwatch is the result of digging deeply into a niche field in brand archives. In the process of searching for something special to revive, under the guidance of the curator of Audemars Piguet Museum in Le Brassus, Lebrat, S└bastian Vivas found some rare things. It was found that from 1959 to 1963, Audemars Piguet created more than 30 asymmetrical styles, most of which had very limited production, less than 10 pieces. Audemars piguet [replica ” target=_blank>02 self-winding wristwatch brought back the era of experimental modeling by reviving a wristwatch that produced only seven pieces-5159BA in 1960.

　　Reviving a watch that has only been produced for seven times … The release of Audemars Piguet [replica ” target=_blank>02 self-winding watch cannot be called the revival of a best-selling model in history. Instead, Audemars Piguet chose some kind of self-exploration. The result is a watch that is not only connected with the past, but also with the physical appearance of the brand. In 1960, the 5159BA model was influenced by rough architecture. [Duplicate ” target=_blank>02 self-winding wristwatch is the evolution of 5159BA, and it is also related to the buildings of Audemars Piguet Museum and the brand’s H?tel des Horlogers. Both buildings were designed by Bjarke Ingels Group (BIG for short), and they have a lot in common with brutalism. The most obvious is the use of original concrete. But how do you turn concrete into a wristwatch?

　　[Duplicate ” target=_blank>02 Self-winding Wristwatch Audemars Piguet [Duplicate ” target=_blank>02 Self-winding Wristwatch-An architectural work with precious “concrete”

　　Before answering this question, let’s explain the word “Brutalism”. According to Reyne Banham, a British architectural critic and writer, it was the Swedish architect Hans Asplund who introduced the word “brutalism” into the field of architecture in 1956. This is an ironic evaluation of a project under construction. The word comes from the use of “beton brut” by architect Le Corbusier, which means “original concrete” in French.

　　Le Brasus’s Audemars Piguet Museum, the watchmaker’s hotel designed by Jacques Inges, and the brutalism Hilton Hotel designed by Jacques Inges in Washington, D.C. Photo: John Leszczynski’s Hayward Gallery in London is a bold example of brutalism.

　　You can say that “brutalism” is a word that is out of shape in translation, but it is also a word that deliberately expresses dissatisfaction. It’s a little sad when you know that le corbusier started to use concrete out of his love for this material. The first building he designed after World War II was La Unit└ d ‘Habitat, a reinforced concrete apartment building for 1,600 working-class people in Marseille, France. Its original intention is good, and it has a positive view on the future, so other architects have followed le corbusier’s example.

　　Marseille apartment designed by le corbusier in Marseille-Photo: Cemal Emden.

　　At first, angular concrete buildings were a great success, but brutalism became obsolete in 1970s. According to Ashley Gardini of JSTOR Daily, “These huge concrete structures are no longer inspiring symbols of post-war development. On the contrary, they are regarded as too powerful and cold buildings, which are often associated with social ills. ” Will this architectural [replica ” target=_blank>02 self-winding watch also cause a sensation? Will it be loved or controversial?

　　Audemars piguet [replica ” target=_blank>02 self-winding watch This architectural style [replica ” target=_blank>02 self-winding watch.

　　Back to [replica ” target=_blank>02 self-winding watch and its connection with the concrete inside two Audemars Piguet buildings designed by Jacques Inges. This asymmetrical watch is completely different from the traditional round [replica ” target=_blank>01 in 2020 (reinterpreting a chronograph in 1943). This new limited edition 250-watch features an asymmetrical 41〜 9.7mm octagonal case. This watch is much larger than the 5159BA model exhibited in Mus└e Atelier Audemars Piguet. The watch in 1960 was very similar in shape, but the case was 18K gold with a diameter of only 27.5mm..

　　Audemars piguet [replica ” target=_blank>02 self-winding watch

　　The reinterpretation in 2024 is not only larger in size, but also uses a different alloy-18k placer gold. This new precious metal first appeared in the Royal Oak Self-winding Flying tourbillon Hollow Watch, and its hue changed between platinum and rose gold. The relatively large angular case presents a horizontal wire drawing effect. Although it does not imitate the concrete surface in museums and hotels, it does realize the visual connection.

　　[Duplicate ” target=_blank>02 Self-winding Watch “Night Cloud Blue No.50” Linear Satin Dial

　　The dial of model 5159BA is silvery white. The redesigned watch adopts Audemars Piguet’s famous color “Night Cloud Blue No.50”. But this time, there is no “small plaid” pattern like the ultra-thin version of the Royal Oak Jumbo. Instead, we found a linear satin finish on the dial, divided into 12 different triangles. The dial not only matches the treatment of the case, but also creates a unique light effect under the angled sapphire crystal.

　　Audemars piguet [replica ” target=_blank>02 self-winding watch

　　The production of special-shaped sapphire glass is a long and difficult process (for third-party suppliers), but the efforts have paid off. Because the new watch is much larger than the inspired model, the result is a more spacious object. With the tilted glass, you can see the dial better. Tilted glass also allows light to shine on the dial at different angles, causing the color to constantly change between dark blue and black.

　　The movement of Audemars Piguet Jumbo

　　[Duplicate ” target=_blank>02 Self-winding watch has a “Jumbo” movement. Yes, it’s called “Jumbo” because in this new angular timepiece, Airbnb’s 7129 movement with only time display is ticking. Why not adopt a special-shaped movement, as Audemars Piguet once made for the discontinued Edward Piguet series? That’s because using an old movement with outdated performance is not an option. According to the brand, it is impossible to update it, and it will be too expensive to manufacture a brand-new special-shaped movement. This will lead to the price of [replica ” target=_blank>02 self-winding watch exceeding 100,000 euros. By using the existing movement in Jumbo, the price of [replica ” target=_blank>02 self-winding watch is only about 47,400 euros. This is still a lot of money, but if we look at Audemars Piguet’s catalogue, the price of 41 mm rose gold Royal Oak (reference number 15510OR.OO.D315CR.02) is 43,700 euros, which will not be too high.

　　Final thoughts on [replica ” target=_blank>02 self-winding watch

　　Audemars piguet has done something unexpected, which deserves praise. Through the [replica ” target=_blank>02 self-winding watch, the brand shows that it dares to do more than just make countless changes on the theme of “RO”. And when it does, it does it in an amazing style. You ask how it feels on your wrist? Well, it’s full of existence. It is not a small watch. If it is made according to the original size of the inspired watch, it will be a very small timepiece according to modern standards.

　　Audemars piguet [replica ” target=_blank>02 self-winding watch

　　Would 38 mm be a better size, especially considering that this watch is asymmetrical, very geometric and architectural? Well, it is very likely that the 7129 movement with a diameter of 29.6 mm will not fit. Upon inquiry, I learned that for a special creation like [replica ” target=_blank>02 self-winding watch, the brand prefers to use an internal movement, rather than a Vaucher-like 4302 movement such as the 37mm Royal Oak Frost Gold self-winding watch (reference number 15550BA.GG.1356BA.01).

　　Symbolic works

　　Most importantly, the [replica ” target=_blank>02 self-winding watch is an iconic work that you won’t wear every day. This watch is aimed at a specific audience-not those who are keen on “RO” or “ROO”-those who dare to wear something different and are willing to pay for it. It seems that every self-respecting architect should own a piece, even those who keep their distance from brutalism. I was deeply impressed by its shape, craft, angled sapphire crystal, the way the light shines on the dial and the outstanding effect of wearing it on my wrist.

　　In this era of global turmoil and people’s desire for comfort and peace of mind, it is interesting that Airbnb decided to launch a watch that is not for everyone. The industry does not mean the fact that it is limited to 250 pieces and expensive. [Duplicate ” target=_blank>02 Self-winding wristwatch is a kind of wristwatch that will make onlookers have polarized views. Unlike the round and soft traditional replica 01, the replica 02 self-winding wristwatch is a bold and powerful work of art and does not want to please others. Therefore, there is almost no middle ground when evaluating this watch. This watch is either love or hate. And people will choose love, and they will wear it to the Met Gala, wedding, another wedding, luxury party, and sometimes they will wear it to the office to trigger a happy conversation.

　　Experts dispel doubts: Cartier watches are fully serviced, how many steps?This shows that, replica watches It has a strong development pulse and is an indispensable source of power for the development of the industry. http://www.316watches.com/

　　Guangzhou Shihui is the earliest officially authorized service center for Cartier watches. So far, it is also the only maintenance center in China that can implement full service. Our staff are often asked, “Cartier watches are fully serviced. How many steps does it take?” Today, I will explain it in detail for everyone.

　　When a Cartier watch is delivered to us for full service, the first step is to conduct a comprehensive inspection and evaluation of the watch.

　　Get more watch information from the professional technical inquiry website, and compare and confirm the technical parameters. This step, all unauthorized maintenance centers can not be carried out because there is no such detailed information.

　　Then, we will carefully check the appearance of the watch to see if the case and strap are worn, scratched or deformed; At the same time, check whether the mirror is scratched or broken. Open the back cover of the watch, make a preliminary observation of the movement, and check whether the parts are corroded or damaged and the state of lubricating oil.

　　After the evaluation is completed, once the guest confirms our quotation or solution, we will turn the watch into a state of waiting for service. If the parts are not complete, we still need to order.

　　After all the parts are ready, the next step is the disassembly of the movement. Carefully remove the movement from the watch case, and disassemble all the parts of the movement, including the clockwork, gear train, escapement system, balance wheel, etc., and each part needs to be handled carefully to prevent damage.

　　After the parts are disassembled, they will enter the deep cleaning link. Use professional cleaning solution and ultrasonic cleaning equipment to thoroughly clean all parts to remove dirt, rust and residual lubricating oil. For stubborn stains, special treatment methods are needed.

　　After cleaning, the parts need to be inspected and repaired. Check whether the parts are worn, deformed or damaged. For the parts with problems, exquisite craftsmanship and professional tools will be used to repair or replace them to ensure the accuracy and stability of the watch.

　　Then reassemble the movement. According to the strict assembly sequence and technical requirements, the cleaned and repaired parts are assembled back one by one, and the torque of each screw and the meshing of each gear need to be accurate.

　　After assembly, lubricate the movement. There are strict standards for the use position and dosage, which is the key step to ensure the smooth operation of the movement and reduce wear.

　　After that, it is fine tuning. Using professional watch calibration instruments, the accuracy of the assembled watch is adjusted, including the adjustment of travel time accuracy, swing, polarization and other parameters, so as to reach the factory standard of Cartier watches.

　　Finally, clean and maintain the appearance of the watch again, install the strap, and put the watch in an environment that simulates daily wear for a period of time to ensure that it can run stably and accurately under various conditions. In this link, there is a very important T0 detection and T24 detection, that is, the travel time accuracy measurement in the state of full spring and half spring. Can meet the standard, is qualified.

　　In a word, a Cartier watch is fully serviced and needs to go through many elaborate and complicated steps. Every step requires professional skills, rich experience and concentration, so that each Cartier watch can glow with its original brilliance and charm.

　　Maintenance tips for Cartier watches;By comparison, it can be seen that replica watches It has certain advantages and great cost performance. http://www.316watches.com/

　　Wipe regularly: use a soft dry cloth to gently wipe the watch case and strap to remove dust and stains.

　　Avoid magnetic field: stay away from magnetic field sources, such as magnets and electrical appliances, so as not to affect the accuracy of movement.

　　Waterproof note: know the specific waterproof rating of the watch, and avoid wearing it for bathing, swimming or touching hot water. If the case gets wet, dry it in time.

　　Avoid collision: It is best to take off your watch when doing strenuous exercise or activities that may cause collision.

　　Adjust the time and function gently: to prevent the movement from being damaged by excessive force.

　　Proper storage: when not in use, put it in a dry and safe place to avoid mixing it with other hard objects.

　　Check the strap regularly: especially the leather strap, pay attention to whether there is any wear and tear, crack, etc., and handle or replace it in time.

　　Avoid extreme temperatures: Do not leave your watch in high temperature or extremely cold environment for a long time.

　　Pay attention to chemicals: avoid contact with perfume, cosmetics, detergents and other chemicals.

　　Keep the winding moderate: if it is a mechanical watch, don’t over-wind it.

　　In addition, you can also pay attention to Cartier’s official website or consult Cartier’s after-sales service center for more professional and accurate maintenance suggestions. At the same time, remember to send the watch to the officially authorized maintenance service center for maintenance and maintenance regularly to ensure the performance and quality of the watch.

　　Misunderstanding of watch maintenance:With the expanding influence of the industry, copy watches Our business is also constantly spreading, and the development of the market is also gradually advancing. http://www.316watches.com/

　　Myth 1: think that waterproof watches are always waterproof.

　　Many people think that as long as the watch is marked with waterproof depth, it can always be used in various water environments with confidence. In fact, the waterproof gasket will gradually age with time and use, and the waterproof performance will decline. If you don’t pay attention to regular inspection and maintenance, it may lead to water damage to the movement.

　　Myth 2: Over-reliance on after-sales maintenance and neglect of daily maintenance.

　　Some people think that it is enough to send them for after-sales maintenance on a regular basis, and they usually don’t pay attention to protecting their watches. However, daily careful use, such as avoiding collision and wiping sweat in time, is also very important for maintenance, and we can’t rely entirely on after-sales phased maintenance.

　　Myth 3: Use non-professional tools to clean at will.

　　Some people will wipe their watches with rough cloth or improper detergent, which may scratch the case and strap, and even cause potential damage to the movement.

　　Myth 4: I think that as long as the watch can walk, it doesn’t need maintenance.

　　Even if the watch looks normal when it leaves, the lubricating oil inside the movement may have deteriorated or dried up, and the parts may have worn to a certain extent. If it is not maintained in time, it may cause more serious problems later.

　　Myth 5: Open the back cover of the table frequently by yourself.

　　Non-professionals open the back cover of the watch at will, which may cause dust and sundries to enter the movement, affect the performance of the watch, and may also accidentally damage the internal structure.

　　Misunderstanding of watch maintenance:At first, copy watches It developed out of control and gradually opened up a sky of its own. http://www.316watches.com/

　　Myth 1: think that waterproof watches are always waterproof.

　　Many people think that as long as the watch is marked with waterproof depth, it can always be used in various water environments with confidence. In fact, the waterproof gasket will gradually age with time and use, and the waterproof performance will decline. If you don’t pay attention to regular inspection and maintenance, it may lead to water damage to the movement.

　　Myth 2: Over-reliance on after-sales maintenance and neglect of daily maintenance.

　　Some people think that it is enough to send them for after-sales maintenance on a regular basis, and they usually don’t pay attention to protecting their watches. However, daily careful use, such as avoiding collision and wiping sweat in time, is also very important for maintenance, and we can’t rely entirely on after-sales phased maintenance.

　　Myth 3: Use non-professional tools to clean at will.

　　Some people will wipe their watches with rough cloth or improper detergent, which may scratch the case and strap, and even cause potential damage to the movement.

　　Myth 4: I think that as long as the watch can walk, it doesn’t need maintenance.

　　Even if the watch looks normal when it leaves, the lubricating oil inside the movement may have deteriorated or dried up, and the parts may have worn to a certain extent. If it is not maintained in time, it may cause more serious problems later.

　　Myth 5: Open the back cover of the table frequently by yourself.

　　Non-professionals open the back cover of the watch at will, which may cause dust and sundries to enter the movement, affect the performance of the watch, and may also accidentally damage the internal structure.

　　Maintenance tips for Cartier watches;In order to achieve the goal, copy watches Turn cocoon into butterfly, constantly polish product quality, improve business ability, and finally have a place in the market. http://www.316watches.com/

　　Wipe regularly: use a soft dry cloth to gently wipe the watch case and strap to remove dust and stains.

　　Avoid magnetic field: stay away from magnetic field sources, such as magnets and electrical appliances, so as not to affect the accuracy of movement.

　　Waterproof note: know the specific waterproof rating of the watch, and avoid wearing it for bathing, swimming or touching hot water. If the case gets wet, dry it in time.

　　Avoid collision: It is best to take off your watch when doing strenuous exercise or activities that may cause collision.

　　Adjust the time and function gently: to prevent the movement from being damaged by excessive force.

　　Proper storage: when not in use, put it in a dry and safe place to avoid mixing it with other hard objects.

　　Check the strap regularly: especially the leather strap, pay attention to whether there is any wear and tear, crack, etc., and handle or replace it in time.

　　Avoid extreme temperatures: Do not leave your watch in high temperature or extremely cold environment for a long time.

　　Pay attention to chemicals: avoid contact with perfume, cosmetics, detergents and other chemicals.

　　Keep the winding moderate: if it is a mechanical watch, don’t over-wind it.

　　In addition, you can also pay attention to Cartier’s official website or consult Cartier’s after-sales service center for more professional and accurate maintenance suggestions. At the same time, remember to send the watch to the officially authorized maintenance service center for maintenance and maintenance regularly to ensure the performance and quality of the watch.

　　Cartier watch full service steps are as follows:in other words replica watches It is possible to develop in a good direction, and there are still many places worth looking forward to in the future. http://www.316watches.com/

　　Preparation: Before starting the service, it is necessary to ensure that the watch is in normal working condition and prepare the required tools and materials.

　　Dismantle the case and strap: use professional tools to disassemble the case and strap for further cleaning and maintenance.

　　Cleaning the case and strap: Clean the surface of the case and strap with detergent and brush to remove dirt and dust.

　　Disassemble the movement: use professional tools to disassemble the movement for further cleaning and maintenance.

　　Cleaning the movement: use detergent and brush to clean the surface of the movement to remove dirt and dust.

　　Replace parts: If you need to replace parts, such as hands, crowns, clockwork, etc., you need to use professional tools to replace them.

　　Assemble the movement: assemble the cleaned and repaired movement back into the case.

　　Adjust the time and date: use professional tools to adjust the time and date of the watch.

　　Assemble the case and strap: assemble the case and strap back to the watch.

　　Test the watch: after completing the service, you need to test the function of the watch to ensure its normal work.

　　It should be noted that the complete service of Cartier watches needs to be carried out by professional watch maintenance personnel to ensure the quality and safety of service.

　　The price of watch maintenance and repair is actually not high!Before that, copy watches The market has also soared for a time, which has attracted the attention of a wide range of investors. http://www.316watches.com/

　　Many people think that the price of maintenance and repair of famous watches is high, and the total service fee is several thousand yuan, but in fact, compared with the value of famous watches themselves, the maintenance and repair price is reasonable and not high.

　　First of all, the watch itself is the crystallization of exquisite craftsmanship, and its internal structure is complex and fine. Maintenance and repair require highly professional skills and knowledge, and watchmakers can only be competent after long-term training and experience accumulation. The training cost of such professionals is extremely high, and their technical value is reflected in the cost of maintenance.

　　Moreover, the materials used in famous watches are often of high quality, such as special metals and precious stones. In the process of maintenance and repair, it is necessary to ensure the use of high-quality parts and materials to maintain the quality and performance of famous watches, which itself requires a certain cost.

　　Moreover, the maintenance of famous watches is not only a simple repair, but also a careful care of their overall state. This includes careful inspection, debugging and optimization to ensure that the watch can run accurately for a long time. This kind of all-round service is to make famous watches continue to show their excellent quality, and in the long run, it is a guarantee for the value of famous watches.

　　Only when the important parts of the watch, such as the case and the dial inlaid with precious stones, are damaged will it lead to higher maintenance costs.

　　Shihui Watch Service Center can repair the original watch case and dial that need to be replaced, greatly reducing the maintenance cost, and at the same time ensuring that every maintenance reaches a high standard.

　　Compared with the value of the watch itself and the long-term use experience and pleasure it can bring, the appropriate maintenance cost is totally worth it.

　　Futurematic, future machinery? Is it a variant of robocop? Or a mechanical terminator?in fact copy watches It is more and more welcomed by our customers, and its market performance is gradually improving. http://www.316watches.com/

　　This watch is very collectible!

　　Jaeger-LeCoultre brand from one of the top ten watches!