Recently, a sales partner encountered a difficult problem. The optical module received by the customer could not be used. After much research, the reason was found. It turned out that the customer purchased an optical module with a heat sink, which did not match the existing network card slot. What is the difference between the flat top and the heat sink top of the optical module? How to choose when using it? Let’s follow the editor to take a look!I think 800g qsfp-dd It will definitely become a leader in the industry and look forward to the high-end products. https://www.3coptics.com/

　　1. The difference between the flat top and the heat sink top of the optical module

　　The flat top and heat sink top in the optical module usually refer to two different structures in the optoelectronic device:

　　Flat-top: Flat-top structure usually refers to the flat top structure of the laser or optical transmitter in the optical module. This design allows light to propagate and focus more easily, which is conducive to more efficient transmission of optical signals in optical fibers or other transmission media. The flat-top design can improve the coupling efficiency and transmission efficiency of light, and is more common in some high-performance optical communications or optical sensors.

　　Heatsink-top: Heatsink-top structure usually refers to the top design of laser or optoelectronic device with heat sink. These heat sinks are usually used to effectively dissipate heat to keep the device operating temperature within a safe range. In high-power or high-density applications, the device may generate a lot of heat, which needs to be transferred to the surrounding environment through the heat sink to prevent the device from overheating and damage. Therefore, the heat sink design is crucial for the long-term stable operation of the optical module.

　　400g optical module

　　2. How to choose the flat top and heat sink top of the optical module

　　With the increase of transmission rate, the size of the optical module is gradually miniaturized, and the requirements for internal optical devices are getting higher and higher. It is very necessary to solve the heat dissipation problem. The flat top and heat sink top of the optical module each have their advantages. Which one is better depends mainly on the transmission rate, interface type, packaging method and specific application scenarios and requirements.

　　Transmission distance and rate requirements: If your application requires long-distance high-speed transmission, the flat-top structure may be more suitable because it is conducive to improving the coupling efficiency and transmission efficiency of light. For short-distance or low-speed transmission, the heat sink top structure can be considered more.

　　Thermal management requirements: If the laser or optoelectronic device in your application needs to handle a lot of power or high-density energy, the heat sink top structure may be more important because it is conducive to effective heat dissipation, thereby maintaining the stable operation of the module and preventing overheating from causing performance degradation or damage. Especially in applications such as high-power optical communications or lidar, good thermal management is essential.

　　Cost and complexity: The flat-top version of the optical module has a simple design and no additional heat sink structure, because it focuses on the light transmission efficiency, while the heat sink top structure may require a more complex design and manufacturing process to ensure good heat dissipation performance. Therefore, you need to weigh these two options when considering cost and complexity.

　　Environmental conditions: Consider the environmental conditions in which your application will operate. If the ambient temperature is high or there may be other heat sources, good heat dissipation may be more important.

　　Reliability and stability requirements: If your application has high requirements for long-term stable operation of the device, it may be more appropriate to choose a heat sink top structure that can provide good thermal management.

　　When it comes to action cameras, Firefly has established itself as a brand that offers high-quality devices capable of capturing breathtaking footage. To truly maximize the potential of your Firefly camera, investing in the right accessories is crucial. In this blog post, we’ll explore some of the must-have firefly camera accessories that will enhance your photography and videography experience.Even if there are obstacles to moving forward, hawkeye firefly q6 action camera We should also persevere, forge ahead bravely, cut waves in the sea of the market, hang on to Yun Fan and strive for the first place. https://hawkeyecameras.com/

　　Why You Need Firefly Camera Accessories

　　Firefly cameras are known for their compact size, durability, and impressive image quality. However, the right accessories can elevate your camera¨s capabilities, making it more versatile and user-friendly. Whether you’re an adventurer, a sports enthusiast, or a professional videographer, these accessories will help you capture every moment with precision and creativity.

　　Essential Firefly Camera Accessories for Capturing Stunning Footage(夕1)

　　Top Firefly Camera Accessories

　　1. Waterproof Case

　　A waterproof case is essential for anyone looking to take their Firefly camera underwater. Whether you’re snorkeling, diving, or simply capturing footage in the rain, a waterproof case ensures your camera stays protected from water damage while maintaining clear image quality.

　　2. Extra Batteries and Charger

　　Long shooting sessions can drain your camera¨s battery quickly. Having extra batteries and a reliable charger on hand means you won¨t miss any important moments. Look for high-capacity batteries that are compatible with your specific Firefly model.

　　3. Mounting Kits

　　Mounting kits offer a range of options for securing your Firefly camera to different surfaces. From helmet mounts for extreme sports to handlebar mounts for cycling, these kits provide the stability you need to capture smooth and steady footage.

　　4. Tripods and Stabilizers

　　For capturing professional-quality videos, tripods and stabilizers are a must. A tripod provides a stable base for your camera, while a stabilizer helps reduce camera shake, resulting in smoother videos. These accessories are particularly useful for time-lapse photography and long-exposure shots.

　　5. Memory Cards

　　High-resolution video files can quickly fill up your camera¨s storage. Invest in high-capacity memory cards with fast read and write speeds to ensure you have plenty of space for your footage. Look for cards that are compatible with your Firefly camera and offer reliable performance.

　　6. Remote Control

　　A remote control allows you to operate your Firefly camera from a distance. This accessory is perfect for capturing group shots, action sequences, or time-lapse videos without having to manually press the shutter button.

　　7. Lens Filters

　　Lens filters can dramatically enhance the quality of your photos and videos. ND filters, polarizers, and UV filters help manage light conditions, reduce glare, and protect your lens. These filters are essential for achieving professional-looking footage in various environments.

　　8. Carrying Case

　　A durable carrying case helps protect your Firefly camera and accessories when you’re on the go. Look for cases with customizable compartments to keep your gear organized and secure. A good carrying case will protect your equipment from impacts, dust, and moisture.

　　9. External Microphone

　　For superior audio quality, consider an external microphone. Built-in camera microphones can pick up unwanted noise and lack the clarity needed for professional recordings. An external microphone ensures clear, crisp audio, which is essential for high-quality videos.

　　10. LCD Screen Protector

　　Protect your camera’s LCD screen from scratches and damage with a screen protector. This inexpensive accessory helps maintain the clarity and functionality of your display, ensuring it stays in pristine condition.

　　Conclusion

　　Enhancing your firefly camera with the right accessories can significantly improve your photography and videography experience. From waterproof cases to external microphones, these accessories provide the tools you need to capture stunning, professional-quality footage in any environment. Invest in these essential Firefly camera accessories and take your creative projects to the next level.

　　Also known as touch keyboard, it adopts an integral sealed structure composed of a flat multi-layer combination. It is a new type of electronic component that integrates light, machine and electricity, and seals the key switch, panel, mark, symbol display and lining together. It is a fundamental change in the appearance structure of electronic products. It can replace the keys of conventional discrete components and perform the tasks of the operating system more reliably. Membrane switches have good waterproof, dustproof, oil-proof, and anti-corrosion of harmful gases. The performance is stable and reliable, light weight, small size, long life, easy assembly, the panel can be washed without damage to the characters, rich colors, and beautiful appearance. Using membrane switches makes your products more contemporary. Main types of membrane switches The membrane switch panel is an electronic component that integrates switch functions and decorative functions, consisting of a rigid or flexible printed circuit board as the base, with buttons with or without feel installed, and then covered with a plastic (polycarbonate PC, polyester PET, etc.) film panel printed with colorful decorative patterns. It is a new type of human-computer dialogue interface. The connection between its switch circuit and the whole machine can be completed by welding or plugging.from touch panel From the reference value, it can also bring a lot of inspiration to other industries. https://singway-touch.com/

　　membrane switch types

　　Types of membrane switches

　　1. Flexible membrane switch

　　Flexible membrane switch is a typical form of membrane switch. This type of membrane switch is called flexible because the mask layer, isolation layer, and circuit layer of the membrane switch are all composed of flexible films of various properties. The circuit layer of the flexible membrane switch uses polyester film (PET) with good electrical properties as the carrier of the switch circuit pattern. This layer is also divided into hand-feel springs and upper and lower circuits. Due to the properties of polyester film, the membrane switch has good insulation, heat resistance, folding resistance and high resilience. The graphics of the switch circuit, including the switch connection and its lead wires, are printed with low-resistance, low-temperature cured conductive paint. Therefore, the composition of the entire membrane switch has a certain degree of softness, which is not only suitable for use on flat bodies, but also can be used with curved bodies. The lead wires of the flexible membrane switch are integrated with the switch body. When making the connection of the group switch, they are gathered at a certain place on the membrane and extended outward according to the position specified in the design and the standard line spacing. They are connected to the rear circuit of the whole machine as soft, arbitrarily bendable and sealed lead wires.

　　membrane switch types

　　2. Rigid membrane switch

　　Rigid membrane switch refers to a switch whose graphics and circuits are made on a common printed circuit copper-clad board. The characteristics of rigid membrane switch are convenient material acquisition, stable process, low resistance, and certain components in the circuit can be directly welded on its back. In the case of a small area, the rigid lining layer can be omitted. Rigid membrane switches generally use metal guides as the contact points for conducting the labyrinth, so they have a better feel. The disadvantage is that they are not as convenient to install in the whole machine as soft membrane switches, and often require welding and lead-out through flat cables. In addition to buzzer signals and LED indications, the information feedback of rigid membrane switches generally uses metal feel springs.

　　membrane switch types

　　3. Flat membrane switch

　　The buttons on the membrane switch use different colors to indicate the position, shape and size of the key body, which is more common in the initial stage of membrane switches. Three-dimensional membrane switch: Usually, the buttons on the membrane switch only use colors to express the position, shape and size of the key body. In this way, the accuracy of the operation can only be identified by the operator’s vision. Since there is no appropriate feedback information to indicate whether the finger is pressed within the effective range of the switch to make the switch operate, it affects the confidence in monitoring the entire machine and the speed of operation. A membrane switch that makes the switch key body slightly raised and slightly higher than the panel to form a three-dimensional shape is called a three-dimensional key switch. The three-dimensional key can not only accurately give the range of the key body, improve the recognition speed, and make the operator’s sense of touch more sensitive, but also enhance the decorative effect of the product appearance. The production of three-dimensional keys.

　　Metal medal production is a well-made metal medal. According to different shapes, it can be divided into: medals, medals, and award plates. Common medal materials: made of aluminum, iron, zinc alloy, copper, gold, silver and other materials. There are also stone, wood, resin, organic, and even several kinds of composite materials.with customized award For example, if it continues to develop, it will definitely become the benchmark of the industry and play an important role in leading the market. https://www.karonmetal.com

　　Materials for making metal medals.

　　High-end medals:

　　1. Breakthrough in technology, make race medals custom in Shanghai Yibi Mint, use advanced and precise production technology and production process, so that this medal shows its original medal value orientation in high-end and uniqueness.

　　2. Breakthrough in design, exquisite design and technology, improve the value of the medal.

　　Process of making metal medals

　　In the medal making industry, what kind of production technology and production process are used to make the medal will make this medal show its original medal value orientation in high-end and uniqueness. Among them, the electroplating process is divided into many categories.

　　Electroplating process – chrome plating

　　Chromium is a silvery-white metal with a slight sky blue tint. The chrome layer has high hardness, good wear resistance, strong reflective ability, and good heat resistance. There is no obvious change in gloss and hardness below 500＜C; it begins to oxidize and discolor when the temperature is greater than 500＜C; it begins to soften when it is greater than 700＜C. Due to the excellent performance of the chrome plating layer, it is widely used as a protective, decorative coating system’s surface layer and functional coating.

　　Custom made trophies and medals.jpg

　　Electroplating process – copper plating

　　Copper is easy to oxidize, and the oxidized patina is no longer conductive; copper plating is easy to lose its luster in the air, and reacts with carbon dioxide or chloride to form a layer of basic copper carbonate or copper chloride film on the surface. It will generate brown or black copper sulfide when it is exposed to sulfides. Therefore, as a decorative copper plating layer, an organic coating layer needs to be coated on the surface.

　　Price of metal medal production

　　The material is very important in the production of metal medals. One cent for one product has always been the value law of any industry and any commodity. It is difficult to get high-end products at a very low price.

　　Wholesale soft enamel sport medal.jpg

　　Details of metal medal production

　　In the daily production of high-end medals, there will be many details to be carefully improved. In addition to the main aspects, it is also necessary to pay attention to local details. For example, what style of medal wooden tray and what kind of medal back plate to match it should not be underestimated.

　　Dongguan Karon Hardware is committed to providing you with customized products such as medals and badges, mastering the core technology of customized badges and medals. In addition to medals and badges, the products produced include various commemorative coins, trophies, key chains, badges, crafts and other personalized hardware products. As long as you want, we can customize it. Creative design and excellent craftsmanship are perfectly combined to meet all your needs.

　　From the plastic restriction order to the plastic ban order, people’s environmental awareness is constantly improving. However, plastic bags are indispensable in supermarkets and homes, so more and more consumers are beginning to pay attention to biodegradable t-shirt bags and fully compostable t-shirt bags. So what are the characteristics of these bags, how do they degrade, and why is there such a significant difference in price?in other words biodegradable mailing bags It is possible to develop in a good direction, and there are still many places worth looking forward to in the future. https://biodegradable-gd.com

　　Different materials

　　Ordinary plastic bags: The main raw material is polyethylene.

　　Biodegradable t-shirt bags: Synthesized by adding a certain proportion of starch, cellulose, photosensitizer, biodegradation agent and other raw materials to non-biodegradable polymer materials.

　　Fully biodegradable bags: PBAT and PLA (polylactic acid, a bio-based degradable material synthesized by fermenting corn into lactic acid and then polymerizing) and starch.

　　Degradation time is different. It takes 200 years for ordinary non-degradable plastic bags to degrade. The various eco-friendly t-shirt bags on the market all refer to those containing plastic components plus specific degradation masterbatch or degradation bacteria. Their form is disintegrated plastic, and there are still plastic molecular structures remaining in the soil and water. Under composting and landfilling conditions, fully eco-friendly t-shirt bags are completely degraded by microorganisms into carbon dioxide, inorganic salts and water within 180 days, directly entering the soil and being absorbed by plants; they can also be degraded in general environments and will not pollute the environment.

　　Biodegradable t shirt bags bulk

　　Biodegradable t shirt bags

　　Biodegradable t shirt bags for sale

　　After understanding the differences between these plastic bags, do you have a new understanding? Now let’s take a look at the advantages of fully biodegradable bags! Using fully biodegradable bags can greatly reduce white pollution; they can also be degraded under composting and landfilling conditions and serve as nutrients for plants. The bag is soft to the touch and uses special process film blowing technology, which has strong toughness and tensile strength; the degradation ability is better than other materials, the life is longer than paper bags, and the cost is lower than paper bags. In addition to the different ingredients, fully compostable t-shirt bags and ordinary plastic bags have the same functions. They can be beautifully printed, of moderate size, and can be packaged for many products. Fully compostable t-shirt bags are soft, wear-resistant, foldable, and have good texture. They can be recycled or composted.

　　Everyone should know how powerful full biodegradable t-shirt bags is, right? Green Dot Spring advocates the concept of green development and has been committed to the research and development of green production, degradable, recyclable, lightweight and reduced-volume products. Now, Green Dot Spring – a new fully biodegradable t-shirt bags has been launched on the market. New and old customers are welcome to consult and purchase!

　　When a novice sends express, they are most afraid of falling into traps: lost parcels, poor after-sales service, various surcharges… Adding all these together, it can be said that there are traps everywhere.with sourching agent For example, if it continues to develop, it will definitely become the benchmark of the industry and play an important role in leading the market. https://flyportt.com/

　　Today, FLY will give you a brief introduction to the international express mailing process to avoid being cheated.

　　1. Preparation stage

　　Choose a courier company: First, you need to choose an international courier company with good reputation and high-quality service. Common international courier companies include DHL, UPS, TNT, FedEx, etc., and domestic SF Express, EMS, etc. also provide international courier services.

　　Understand prohibited items: Before preparing to mail, be sure to understand the regulations of the customs of each country on prohibited items to ensure that the items you are sending are not prohibited. This includes prohibited items, dangerous goods, fragile items, etc.

　　Prepare the package: Choose appropriate packaging materials according to the nature and quantity of the items to be sent to ensure that the items will not be damaged during transportation. At the same time, make sure that the package is clearly labeled with the recipient’s address and contact information.

　　international express

　　2. Delivery stage

　　Fill in the waybill: Fill in the waybill at the courier company outlets or online platforms, including the sender, recipient’s name, address, contact information, and basic information such as the weight and size of the package.

　　Payment: Pay the corresponding freight according to the selected courier’s charging standards. Payment methods usually include cash, bank cards, online payment and other options.

　　Send the package: Hand the package to the courier or deliver it to the courier company’s outlet/third-party shipping company warehouse to complete the delivery procedures.

　　international express

　　3. Transportation stage

　　Sorting and packing: After receiving the package, the courier company/third-party shipping company will sort and pack it to ensure that the package can reach the destination safely and quickly.

　　Customs inspection: During the cross-border transportation process, the package needs to be inspected by the customs of each country. If the package contains items restricted or prohibited by customs, it may be detained or returned.

　　Transshipment and delivery: After the package is inspected by customs, it will be transferred according to the predetermined route and finally delivered to the recipient. The courier company will notify the recipient of the arrival of the package through SMS, email, etc., and provide the corresponding pickup method.

　　international express

　　4. Signing for and after-sales service

　　Signing for the package: After receiving the package, the recipient needs to check whether the information on the package is consistent with his own, and check whether the items in the package are intact. If there is any problem, you can contact the express company in time for processing.

　　After-sales service: If the recipient finds that the item is damaged or lost after signing for the package, he or she can contact the courier company to make a claim. The courier company will make compensation according to relevant regulations.

　　In today’s fast-paced technological landscape, the demand for reliable, durable, and efficient user interfaces is higher than ever. Membrane switches, known for their versatility and compact design, play a crucial role in a wide range of applications, from consumer electronics to industrial machinery. When it comes to sourcing high-quality membrane switches, Singway stands out as a leader in the industry. Here’s why Singway should be your go-to manufacturer for membrane switches.For these reasons, I think membrane switch The situation is still optimistic, and the market is still in a blue ocean stage. https://singway-touch.com/

　　singway membrane switches

　　1. Unmatched Quality and Reliability

　　At Singway, quality is paramount. Each membrane switch undergoes rigorous testing and quality control to ensure it meets the highest standards of performance and durability. Singway’s commitment to quality means that every switch is built to last, providing reliable operation even in the most demanding environments. This reliability ensures that your products maintain their functionality and performance over time, reducing the need for frequent replacements and repairs.

　　2. Advanced Manufacturing Techniques

　　Singway employs advanced manufacturing techniques and state-of-the-art equipment to produce membrane switches that are both precise and consistent. By leveraging the latest technology, Singway can achieve intricate designs and complex configurations, ensuring that each switch meets the specific requirements of your application. This precision manufacturing results in high-performance switches with excellent tactile feedback and responsiveness.

　　3. Customization and Flexibility

　　One of Singway’s key strengths is its ability to offer customized solutions tailored to your unique needs. Whether you require specific dimensions, unique graphics, or specialized functionalities, Singway can design and manufacture membrane switches that align perfectly with your specifications. This flexibility allows you to create products that stand out in the market and meet the exact demands of your customers.

　　4. Wide Range of Applications

　　Singway’s membrane switches are designed to cater to a diverse range of applications, including medical devices, automotive controls, consumer electronics, and industrial equipment. This versatility ensures that no matter your industry, Singway has the expertise and capability to provide the ideal membrane switch solution. Their extensive experience across various sectors guarantees that you receive switches that are perfectly suited to your application¨s specific requirements.

　　5. Excellent Customer Support

　　Singway prides itself on providing exceptional customer support throughout the entire manufacturing process. From initial consultation and design to production and delivery, Singway’s team of experts is dedicated to ensuring that your experience is seamless and satisfactory. Their proactive approach to customer service means that any issues or concerns are addressed promptly, ensuring that your project stays on track and within budget.

　　6. Cost-Effective Solutions

　　Despite offering top-notch quality and advanced features, Singway remains committed to providing cost-effective solutions. Their efficient manufacturing processes and economies of scale enable them to offer competitive pricing without compromising on quality. This affordability makes Singway an attractive partner for businesses looking to balance high performance with budget considerations.

　　7. Sustainable and Eco-Friendly Practices

　　Singway is dedicated to sustainable manufacturing practices and minimizing its environmental impact. They use eco-friendly materials and processes to produce membrane switches, ensuring that their products are safe for both users and the environment. By choosing Singway, you not only get high-quality switches but also contribute to a more sustainable future.

　　8. Innovative Design Capabilities

　　Innovation is at the heart of Singway’s approach to manufacturing. Their team of skilled designers and engineers continually explores new materials, technologies, and design methodologies to create membrane switches that push the boundaries of performance and aesthetics. This commitment to innovation ensures that you receive cutting-edge products that keep your offerings ahead of the competition.

　　9. Global Reach and Timely Delivery

　　With a robust global supply chain and efficient logistics, Singway ensures timely delivery of your membrane switches, no matter where you are located. Their ability to meet tight deadlines and deliver products on time is crucial for businesses that operate in fast-paced markets and rely on timely product launches and updates.

　　What Factors Should You Consider When Customizing Medals?From some points of view, custom medals for awards It is the core driving force to better promote the rapid development of the surrounding markets. https://www.karonmetal.com

　　1. The style of medal design

　　The first factor of metal medals is the style and style of medal design. The shape should be special and not vulgar, which is a rare type on the market.

　　2. The material of medal production

　　From the current needs of users of medal production, it is obvious that bronze medals and stainless steel medals can no longer meet the high-end needs of customers. The choice of medal material determines whether the medal is high-end.

　　3. The process of medal production

　　In the medal production industry, the production process and production process used to make the medal will make the medal show its original medal value orientation in terms of high-end and uniqueness.

　　4. The primary and secondary distinction of medals

　　In the production of custom metal medals, it is necessary to determine the primary and secondary of the style and style of the medal, the content and text, and the award-giving and winning needs.

　　5. The font standard of the medal

　　Many medals claim to be high-end medals, but the fonts in the medals will not be selected. What font is set for the main title of the medal and what font is set for the text, they have no idea. All commonly used fonts need to be understood.

　　6. Correct content of medals

　　When advanced unit medals and civilized unit medals are often required to be high-end, the most easily overlooked thing is the comparison of medal content. When making a medal, it is very important to compare and check the content of the medal.

　　7. Perfect details of medals

　　In the daily production of metal medals, there will be many details to be carefully improved. In addition to the main big things, it is also necessary to strengthen the attention to local details. For example, what style of medal wooden tray and what kind of medal back plate to match it should not be underestimated.

　　8. Clean layout of medals

　　I believe no one will like the colorful medal layout. Clean here does not mean dirty, but mainly refers to chaos and disorder.

　　9. The price of medal production

　　One cent for one product has always been the value law of any industry and any commodity. It is now difficult to obtain high-end products at a very low price.

　　10. The medal is beautifully packaged

　　The packaging of metal medals is like our attire and clothing. The color matching is natural and elegant. The outer packaging of metal medals is matched. Whether to use ordinary paper boxes or high-end wooden brocade boxes is very particular. The packaging depends entirely on the high-end and authoritative nature of the recipient of the medal.

　　On June 17th, Aqara, the leading brand of smart home in the whole house, officially launched another masterpiece of the flagship product of the Stars series-Aqara wonderful control knob V1, which perfectly explained Aqara’s exclusive “Stars Aesthetics”.So, Azilian lifemotion On the contrary, there is still a lot of room to play. https://www.azilian.co

　　Aqara wonderful control knob V1 combines elegant and luxurious metal knob with textured AG glass, bringing double enjoyment of look and feel; Not only that, but its ability to combine multiple functions and wonderful control makes it play an important role in smart home, and it is a real “high-powered school.”

　　Stars aesthetics is good at form.

　　Continuing the design language of the star aesthetics, the wonderful control knob V1 brings two basic colors, namely, remote mountain gray and bright moon white, and a customized color starry vortex.

　　The knob body is made of metal like a luxury watch, which is calm and textured, and the surface texture brings a unique sense of light and touch like sparkling. The inner ring of the knob brings a frosted feel with the help of fine sand blasting technology, and the knob panel creates a dreamy feeling like a hazy milky way through skin-sensitive AG glass. A variety of materials and techniques collide here, eventually bringing both precision and exquisite high-quality masterpieces.

　　Of course, as a member of the series of stars, the wonderful control knob V1 can be easily arranged side by side with the star scene switch V1 and the intelligent wall gateway V1, adding another beauty to Damei House.

　　Intelligent and clever control of the heart

　　The core of the clever control knob V1 lies in “turning”. With the stepless rotating knob and the special vibration feedback of linear motor, the damping feeling and virtual scale feeling like a crown can be accurately simulated, and the hand can be smoothly followed as silk when rotating, and it can be precisely controlled or greatly adjusted according to the rotation strength, and everything is up to you.

　　Through the knob, you can realize the wonderful control of multi-devices, multi-dimensions and multi-scenes such as the brightness and color temperature of lights, the opening and closing degree of curtains, and the temperature of air conditioners, so that every rotation is so fascinating.

　　Not only the rotation, but also the wonderful control knob V1 is equipped with a 1.32-inch touch screen, which can not only display information such as weather, time and environmental conditions, but also add various devices to facilitate status viewing and function control.

　　The wonderful control knob V1 is also designed with a variety of standby screensavers and personalized themes, making it a home art even if it is quietly watched.

　　Combine many talents in one body

　　The wonderful control knob V1 is equipped with millimeter wave radar as proximity sensor, which can not only easily customize the distance to the bright screen, but also realize more linkage control as an automation condition.

　　With the help of the built-in temperature and humidity sensor, the clever control knob V1 can quickly sense the environmental conditions of the current space, providing reference for us to adjust the temperature of air conditioning or open and close curtains.

　　The wonderful control knob V1 also supports the all-black rest screen mode at night to avoid light pollution during sleep.

　　Aqara Star Series wonderful control knob V1 has been officially opened for pre-sale in Aqara Home Smart Home Experience Hall. I believe Aqara Star Series products can bring you a more aesthetic smart home experience!

　　Recently, Vishay Inter Technology, Inc. (NYSE: VSH) announced that it has launched two new panel potentiometers with built-in knob switches —P16F and PA16F and IP67 sealed. Vishay Sfernice P16F and PA16F potentiometers have a dielectric strength of up to 5000 VAC and a rated power of 1 W at+40 C, which can be used to simplify the design of industrial and audio applications and optimize the cost.precisely because Azilian knob The rapid development of, so also brought new opportunities to the industry. https://www.azilian.co

　　The device released a few days ago integrates a knob and a panel potentiometer in one assembly, and there is no need to purchase and assemble a separate knob. In addition, only the installation hardware and terminals are located on the back of the panel, and the required gap on the back of the micro potentiometer panel is less than 15 mm

　　11.png

　　PA16F adopts conductive plastic resistor core, which is suitable for audio applications. P16F cermet knob potentiometer is suitable for industrial motor drives, welding equipment, HVAC and lighting systems and control panels. The device is fully sealed according to IP67 standard and can work reliably under extreme environmental conditions.

　　Potentiometer can customize knob scale, resistance, wires and connectors, as well as pawl and switch options. The device can also provide metal knobs as required. P16F and PA16F meet CECC 41000 or IEC 60393-1 test standards.