Keep your mouth clean after osteotomy to prevent infection. Eat liquid food, such as juice, broth or milk, after 6 hours, eat semi-liquid food, such as egg soup, rotten noodles, millet porridge and sour milk, after 12 hours, and then slowly transition to normal diet.understand 台北削骨r格 In order to better serve customers and reflect the core competitiveness of products. https://easycode.com.tw/?cat=1

　　Don’t eat spicy, irritating and hard food for one week, remove the drainage 36~48 hours after operation, and don’t let the surgical site get wet for one week after operation, keep the surgical site clean and hygienic to prevent infection.

　　If there is secretion or blood scab on the wound, it should be wiped with sterile saline. In addition, keep oral hygiene, brush your teeth once every morning and evening, rinse your mouth in time after meals, and rinse your mouth with mouthwash 4~6 times each time. ? Warm reminder that osteotomy is a relatively traumatic operation, which will inevitably bring certain risks. It is necessary to choose regular hospitals and professional doctors, so that the operation can be guaranteed and safe.

　　On April 9 th, it was reported that people may have a concept that green is good for eyes, so they set the background color of screens, screensavers and word documents of electronic devices to green to protect their eyes.

　　The doctor said that looking at green to relieve visual fatigue means looking at the green outside the window. The farther you look, the more relaxed your eyes are. The green electronic screen has nothing to do with green. It is still an electronic screen.

　　As we all know, people usually blink 15 times a minute. Tears are evenly distributed on the surface of eyes to avoid dryness and irritation.

　　But researchers found that people blink less than half as often when reading, watching or using the screen. Moreover, the contrast between the text and the background, glare and screen flicker have an impact on the eyes, which will lead to visual fatigue.

　　Therefore, we can make our eyes look at the screen more easily in the following ways.

　　1. Make sure that the computer screen is about 60 cm away from the face or the length of the arm. The center of the screen should be about 10~15 degrees below eye level.

　　2. During the use of the equipment, rest for 15 minutes every 2 hours.

　　3. Ensure that the lighting in the room is bright enough, and the equipment should not be brighter than the surrounding environment.

　　4, regular eye examination.

　　Every woman wants to become a small V-face like a star. With the development of medicine, many methods can make people lose face quickly, such as osteotomy. The effect of this operation is permanent. What are the common surgical methods?Sufficient data show that 削骨 It can drive many people to find jobs, thus driving economic development. https://easycode.com.tw/?cat=1

　　What are the methods of osteotomy?

　　1. Mandibular angle surgery The Chinese character face and the square face are called mandibular angle hypertrophy, which makes the face look very wide and not photogenic. If the five senses don’t match, the whole person looks old and rustic. It can be treated by mandibular angle surgery, which is mainly divided into mandibular resection and cortical resection. Mandibular resection is divided into local resection and total resection. The posterior part of mandibular angle is wide, so mandibular resection can be chosen. If the mandible is not too big, cortical resection can be suggested. Mandibular angle surgery can be done for people with obvious hypertrophy and valgus of mandibular angle, unilateral or bilateral prominent mandibular angle, bilateral asymmetry and uncoordinated ratio of upper and lower width of face.

　　2, zygomatic surgery, zygomatic bone and zygomatic arch are the bone support in the middle of the face. Their size and shape determine the width of the face and the curvature of the side, but also affect the appearance and contour of the face. When the zygomatic bone is too high, it can be solved by zygomatic surgery, which is mainly divided into zygomatic grinding and zygomatic pushing. The former is to make an incision in the mouth and grind the prominent cheekbones with special bone grinding equipment to reduce the protruding volume of the cheekbones, and the zygomatic arch can be completely preserved, which is suitable for people whose front cheekbones are not wide but whose side cheekbones are prominent.

　　The latter is to make an incision from the mouth in front, cut off the frontal cheekbones and remove some bones. At the rear, an incision is made according to the hairline to cut off part of the cheekbones and remove part of the bones, so that the whole cheekbones are pushed inward to a suitable position, and then the metal is used for strong internal fixation, which is suitable for people with prominent and wide cheekbones, but the technology is complicated and requires high doctors.

　　1. Long press the information, and you will see which software is pushed. Open this software, find the settings, and close the push. You can also turn off the push permission of the software in the application permission of the mobile phone.

　　2. If the phone is in the lock screen, it will also push hot information. At this time, you can find the software, then open the software settings and turn off the “lock screen reading switch”.

　　3. How to close the browser to recommend hot information: Open the browser, click the menu option in the upper right corner to expand the menu list, and click the Settings button. You can close the hot information through the settings in the settings interface. After entering the settings interface, click the navigation menu on the left and click Lab. Hot information can be found in the lab. You can set the browser not to automatically push hot information by checking the check box in front of the hot information.

　　4. Method of closing the negative screen page of the mobile phone: First, randomly enter a mobile phone desktop, and hold it down for a long time to enter the interface management page, and then click the settings in the lower right corner of the page to find “negative screen” and close it. You can also set some other functions about the mobile phone desktop in this setting.

　　Facial osteotomy is a common and risky plastic surgery. Of course, even if the risk is high, there are still many people who are eager for this kind of operation, because facial bone cutting can change a person’s face shape very well and make it look more exquisite and beautiful. After facial osteotomy, there are also some precautions. Below, I will introduce you to the relevant knowledge of facial bone cutting!In the past ten years, 削骨r格 Defeated many competitors, courageously advanced in the struggle, and polished many good products for customers. https://easycode.com.tw/?p=1

　　A brief introduction to the operation

　　Jaw grinding and bone cutting is a plastic surgery that cuts the inside of the mouth near the mandibular angle, removes all the inner and outer layers of the redundant mandible, and then grinds and thins the edge of the external plate of the redundant mandible. Plastic surgery opens the facial skin and muscles from the mouth, separates the muscles from the periosteum, exposes the bone parts that need to be ground, draws an osteotomy line according to the designed amount of bone cutting, and finally uses a long-handled swing saw to remove the mandibular angle according to the osteotomy line. Generally, the range of 3-4 cm long and 1-2 cm high can be cut off in an arc shape, and the edges and corners after osteotomy can be smoothed. Achieve the effect of face-lifting.

　　Second, the risk of surgery

　　Many people modify facial bones to change their faces. There are two ways to modify bones, one is to grind bones, the other is to chisel away some bones with a professional medical chisel, and the latter method is no longer used in clinic.

　　If the patient’s cheek is hypertrophy, part of the inner masseter muscle will be removed, or part of the buccal fat pad will be removed by slightly separating it to the outside. In this process, it is inevitable that there will be asymmetry in protecting nerve and blood vessels and osteotomy in the operation of grinding cheeks and cutting bones. Bone grinding surgery may lead to massive bleeding or nerve damage, making the face feel numb and even facial paralysis.

　　Third, matters needing attention

　　1. First of all, we’d better stay in hospital for about 3 days after operation.

　　2. It is best to squeeze and wrap the wound for about a week after operation, which can effectively prevent discomfort and swelling after operation.

　　3. You can’t massage your face within three months after the operation, and try to touch your face as little as possible.

　　4. It is best to eat some liquid food one week after the recovery period of bone grinding and plastic surgery, and pay attention to avoid some spicy food and hard biting food within three months.

　　The above is the introduction about facial osteotomy. Of course, since it is a high-risk operation, we must choose a regular and reliable hospital before the operation, so as to avoid all kinds of sequelae and side effects and ensure the safety of beauty seekers!

　　When we choose a mobile phone, the screen quality is the first appeal of many users. As the only image export, mobile phone manufacturers are constantly iterating over the quality of the mobile phone panel every year. The selection of the mobile phone screen depends on the four parameters: resolution, refresh rate, touch sampling rate and screen material.

　　Resolution and refresh rate determine the visual effect.

　　At present, the screen pixels of the thousand yuan machine are basically 1080P+60Hz, and such an entry panel has been used for nearly ten years. At the price of 1,500 yuan, you can basically buy a screen with a high brush of 90Hz or 120Hz, while at the high end of 3,000 yuan or more, you can basically equip it with 2K resolution and refresh rates of 120Hz, 144Hz or even higher.

　　If we only look at the pixels, the resolution of 1080P is basically enough, and the resolution of 2K has more or less high requirements for the battery life of the mobile phone. Users have already failed to meet the screen with 60Hz refresh rate, and the high screen of 120Hz is gradually solving the cost problem. In recent years, the popularity of mid-range computers has basically been completed.

　　So simply use the price of mobile phones to popularize the corresponding panels:

　　1000-1500 yuan: 1080P+60Hz1500-2500 yuan: 1080P+90, 120Hz2500-3000 yuan: 2K+120Hz3000 yuan or more: 2K+144Hz or higher.

　　Gamers must watch: touch sampling rate

　　The sampling rate is more accurate to locate the finger on the screen of the mobile phone. When playing a game, the mobile phone with high sampling rate will also receive the finger instruction faster, thus being one step ahead of others in the game.

　　The hand sends various instructions to the mobile phone by sliding the screen. The higher the screen sampling rate, the higher the accuracy of the instructions, and there will be no broken touch. Generally, the screen with higher sampling rate has more obvious advantages in the game.

　　That is to say, the higher the touch sampling rate, the faster your reaction when you touch the screen during the game, and you will be able to throw skills earlier than other players, thus forming operations in the game faster.

　　Generally, the parameter of touch sampling rate will be introduced on the introduction page of mobile phone, and the higher this value is, the better. Generally, the touch sampling rate of game mobile phones is relatively high, and some manufacturers claim that their screens are “e-sports screens”, which is also relatively high. The instantaneous touch sampling rate generally exceeds 1000Hz.

　　Screen material determines the quality of imaging.

　　Finally, we talked about the screen material, which is the same as when we went to the home appliance market to buy a TV. When a variety of TVs are put together, you can easily compare which TV has better color and higher quality.

　　At present, the screen materials of mobile phones are basically TFT, LCD, AMOLED and Micro OLED.

　　TFT: currently used less, basically distributed in 100-yuan machines, with high power consumption, low sampling rate and poor hair color. It is facing the elimination of LCD, the main force of entry-level “cost-effective” mobile phones, with high penetration rate and low cost. AMOLED, which is developed from OLED, has high contrast, good hair color, power saving, refresh rate and other values, and high Micro OLED, which has high color gamut and fast response speed, but high cost and is generally very high.

　　Random screen materials from second to best, the choice of the above screen materials basically corresponds to the price of the mobile phone. Generally, the entry-level to mid-range models within 2,000 yuan are LCD screens, while the flagship model AMOLED is basically standard, and Micro OLED is the top screen ceiling.

　　For example, the whole iPhone12-14 uses OLED screens, while the previous iPhone11 used LCD screens. If you have friends around you who happen to be using these models, you can see the difference between them.

　　Every woman wants to become a small V-face like a star. With the development of medicine, many methods can make people lose face quickly, such as osteotomy. The effect of this operation is permanent. What are the common surgical methods?Now, everyone is right 削骨嗤 Are more concerned, hoping to get more benefits from it. https://easycode.com.tw/?p=1338

　　What are the methods of osteotomy?

　　1. Mandibular angle surgery The Chinese character face and the square face are called mandibular angle hypertrophy, which makes the face look very wide and not photogenic. If the five senses don’t match, the whole person looks old and rustic. It can be treated by mandibular angle surgery, which is mainly divided into mandibular resection and cortical resection. Mandibular resection is divided into local resection and total resection. The posterior part of mandibular angle is wide, so mandibular resection can be chosen. If the mandible is not too big, cortical resection can be suggested. Mandibular angle surgery can be done for people with obvious hypertrophy and valgus of mandibular angle, unilateral or bilateral prominent mandibular angle, bilateral asymmetry and uncoordinated ratio of upper and lower width of face.

　　2, zygomatic surgery, zygomatic bone and zygomatic arch are the bone support in the middle of the face. Their size and shape determine the width of the face and the curvature of the side, but also affect the appearance and contour of the face. When the zygomatic bone is too high, it can be solved by zygomatic surgery, which is mainly divided into zygomatic grinding and zygomatic pushing. The former is to make an incision in the mouth and grind the prominent cheekbones with special bone grinding equipment to reduce the protruding volume of the cheekbones, and the zygomatic arch can be completely preserved, which is suitable for people whose front cheekbones are not wide but whose side cheekbones are prominent.

　　The latter is to make an incision from the mouth in front, cut off the frontal cheekbones and remove some bones. At the rear, an incision is made according to the hairline to cut off part of the cheekbones and remove part of the bones, so that the whole cheekbones are pushed inward to a suitable position, and then the metal is used for strong internal fixation, which is suitable for people with prominent and wide cheekbones, but the technology is complicated and requires high doctors.

　　Although many manufacturers will claim how hard the screen is, in fact, every mobile phone user will face the problem of screen scratches. Many people will put a protective film on their mobile phone screens to protect them, which will not only cost money, but also affect the look and feel.

　　If you don’t film it, there will be many scratches on the screen of the mobile phone soon. Although it generally does not affect the normal use, the experience is reduced to a certain extent, even when the second mobile phone is sold, it will affect the price.

　　According to the latest forecast of CCS Insight, a global technology research and consulting company, smartphone manufacturers will begin to produce smart phones with the function of self-repairing screen scratches within five years.

　　Ben Wood, chief analyst of CCS Insight, believes that this is not a story in science fiction, it can be done, and the biggest challenge is to set expectations for it correctly.

　　He also said: We are not talking about how the broken screen is restored. This is something that magic can do. What we are talking about is the self-repair of scratches on the screen surface, thus prolonging the service life of the equipment. “

　　The core of this technology is a brand-new material, which can cover the screen surface with a coating. Specifically, this coating is composed of a special material. When it is scratched, it will trigger a chemical reaction and produce a new material. When exposed to air, this new material will react and fill the defect, so that the scratch is repaired.

　　Wood finally pointed out that this technology needs further research and development, and interdisciplinary cooperation and innovative materials science are needed. Nevertheless, I still think it is possible to commercialize this technology in the next five years. “

　　In fact, various manufacturers have been studying the technology of self-repairing screens. In 2017, Motorola applied for a patent for a screen made of shape memory polymer; In 2019, Huawei also applied for a patent entitled “A method and equipment for repairing glass scratches”; Apple has also applied for a patent for a foldable iPhone, and its display can be repaired by itself when it is damaged.

　　Every woman wants to become a small V-face like a star. With the development of medicine, many methods can make people lose face quickly, such as osteotomy. The effect of this operation is permanent. What are the common surgical methods?However, in other words, we should know more about it. 台北削骨手g The law of development has brought new vitality to the whole industry and revitalized the market. https://vline.com.tw/

　　What are the methods of osteotomy?

　　1. Mandibular angle surgery The Chinese character face and the square face are called mandibular angle hypertrophy, which makes the face look very wide and not photogenic. If the five senses don’t match, the whole person looks old and rustic. It can be treated by mandibular angle surgery, which is mainly divided into mandibular resection and cortical resection. Mandibular resection is divided into local resection and total resection. The posterior part of mandibular angle is wide, so mandibular resection can be chosen. If the mandible is not too big, cortical resection can be suggested. Mandibular angle surgery can be done for people with obvious hypertrophy and valgus of mandibular angle, unilateral or bilateral prominent mandibular angle, bilateral asymmetry and uncoordinated ratio of upper and lower width of face.

　　2, zygomatic surgery, zygomatic bone and zygomatic arch are the bone support in the middle of the face. Their size and shape determine the width of the face and the curvature of the side, but also affect the appearance and contour of the face. When the zygomatic bone is too high, it can be solved by zygomatic surgery, which is mainly divided into zygomatic grinding and zygomatic pushing. The former is to make an incision in the mouth and grind the prominent cheekbones with special bone grinding equipment to reduce the protruding volume of the cheekbones, and the zygomatic arch can be completely preserved, which is suitable for people whose front cheekbones are not wide but whose side cheekbones are prominent.

　　The latter is to make an incision from the mouth in front, cut off the frontal cheekbones and remove some bones. At the rear, an incision is made according to the hairline to cut off part of the cheekbones and remove part of the bones, so that the whole cheekbones are pushed inward to a suitable position, and then the metal is used for strong internal fixation, which is suitable for people with prominent and wide cheekbones, but the technology is complicated and requires high doctors.

　　What to wear under ski pants?If we can practice these points, ninetyroll snowpants Will be unique, become a leader in the industry, and keep moving forward. https://ninetyroll.co/

　　1. Ski socks

　　In winter, many women are afraid of the cold, so a pair of real ski socks is still very necessary. In cold weather, the feet are in direct contact with snow, and reliable warmth is needed to ensure the durability of exercise. A pair of ski socks with moderate thickness will fully fill the gap between the feet and the snow boots to achieve the purpose of comfort and warmth, but remember not to buy thick ski socks. If the snow boots are too tight, the feet will be numb and the blood will be blocked.

　　2, warm and sweat-wicking clothes

　　A truly warm and sweat-wicking ski suit is necessary. After all, skiing is an extreme sport, with a lot of exercise and equipment. All needs are based on lightness, thinness and warmth. Forget the ordinary jersey and long pants. If the budget is limited, you can also have ultra-thin thermal underwear. Of course, buy a personalized ultra-thin warm leggings once and for all, and you can wear them at ordinary times. There is no need to go to the ski shop to spend more money. Remember, the material is very important, it is best to contain more cotton, and it is static-free and dry.

　　3. Grab cashmere pants

　　Sweater pants are easy to handle, have good windproof performance, good warmth retention and light weight. Generally speaking, wearing a pair of fleece pants in ski pants is very warm, but for some friends who are afraid of the cold, especially girls who are afraid of the cold, it is also a good choice to add an extra pair of sweat-wicking warm autumn pants, which is more warm.