Monthly Archives: March 2025

　　Before introducing different configurations of electric wheelchairs, let’s first understand the basic structure of electric wheelchairs. Electric wheelchair is usually composed of motor, controller, battery, frame and other main parts. The motor is responsible for driving the wheels, the controller controls the speed and direction of the motor, the battery provides electric energy, and the frame supports the whole structure. Different configurations of electric wheelchairs are different in these parts, which will be introduced in detail below to help you understand.with 電動輪椅價錢 For example, if it continues to develop, it will definitely become the benchmark of the industry and play an important role in leading the market. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Motor: The motor of electric wheelchair is its core component, which directly affects the performance of wheelchair. At present, the electric wheelchairs on the market usually adopt DC Motor and AC Motor. DC motor usually has a high speed and is suitable for use on flat roads, while AC motor has a large torque and is suitable for driving on ramps and uneven roads. In addition, the power of the motor is also a key factor in the selection. The greater the power, the stronger the climbing ability and load capacity of the electric wheelchair. Therefore, when choosing an electric wheelchair, it is necessary to choose the appropriate motor type and power according to the user’s needs and specific use environment. In the difference between electric wheelchairs, it is necessary to distinguish between brush motors and brushless motors, and between AC motors and DC motors.

　　Brushed DC motor refers to a DC motor that uses a carbon brush to contact with a rotating armature to exchange polarity and provide current. Brush provides current to armature through power supply when armature rotates, so it is also called carbon brush motor. Its advantages are simple structure and low use cost, but the brush is easy to wear and has limited service life, and at the same time, the brush will also produce electric spark interference, which will lead to high noise of the motor and is not suitable for high-precision applications.

　　Brushless DC motor refers to a DC motor that uses an electronic commutator to control the phase sequence of the motor, without using a brush to contact the armature. Its advantages are long life, high efficiency, low noise, stable operation and fast response, so it is widely used in high-precision application fields such as high-performance power tools and electric vehicles. Disadvantages are complex structure and high cost.

　　The development trend of electric wheelchair and old scooter is portable, and the lighter the electric wheelchair, the more convenient it is. However, there will be some wrong operations when the elderly choose or use them, which will often cause unnecessary problems and avoid unnecessary injuries caused by improper operation.Actually, it’s not just this reason, 電動輪椅 Its own advantages are also obvious, and it is normal for the market to perform well. https://www.hohomedical.com/collections/light-weight-wheelchair

　　First, the driving operation is not standardized: the elderly and disabled people sometimes appear in the fast lane and ignore the traffic lights when driving electric wheelchairs and old scooters. This is a very dangerous operation, because the speed of electric wheelchairs and old scooters is very slow, and the speed is generally not more than 10 kilometers per hour. Driving an electric wheelchair scooter on the fast lane will cause traffic congestion, and in the worst case, it will cause a serious traffic accident. You must not drive on the motor vehicle lane, and you should drive on the sidewalk or non-motor vehicle lane.

　　Second, electric wheelchairs and old scooters need daily maintenance, especially before use, the power and tires must be checked, and the welding points of the frame and the tightness of each screw need to be checked every once in a while. Electric scooter had better keep the battery fully charged at any time, and charge it as needed. Frequent power loss will lead to the reduction of power storage capacity. There are still many people who blindly pursue cruising range and driving speed when purchasing electric wheelchairs and old scooters. In reality, it should be chosen according to the user’s normal range of activities. If the range of activities is small, it is not necessary to choose an old scooter with too large battery capacity.

　　Third, in the process of selling electric wheelchairs and elderly scooters, many elderly people often choose portable folding electric wheelchairs for convenience. In fact, this is a serious misconception. We always guide the elderly not to move electric wheelchairs, scooters and so on. Even if it is difficult to pass, it is recommended to get off and pass. If you encounter steps on the road, it is best to ask your family or passers-by for help. It is not recommended for the elderly to move it by themselves, because the lightest folding electric wheelchair weighs about twenty or thirty kilograms. This weight is also very heavy for the elderly, and if you move it by your own strength, it may lead to unnecessary injuries such as waist fractures.

　　Before introducing different configurations of electric wheelchairs, let’s first understand the basic structure of electric wheelchairs. Electric wheelchair is usually composed of motor, controller, battery, frame and other main parts. The motor is responsible for driving the wheels, the controller controls the speed and direction of the motor, the battery provides electric energy, and the frame supports the whole structure. Different configurations of electric wheelchairs are different in these parts, which will be introduced in detail below to help you understand.If you want to make a big difference in the market, 電動輪椅價錢 It is necessary to intensify the upgrading of products on the original basis in order to meet the consumption needs of consumers. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Motor: The motor of electric wheelchair is its core component, which directly affects the performance of wheelchair. At present, the electric wheelchairs on the market usually adopt DC Motor and AC Motor. DC motor usually has a high speed and is suitable for use on flat roads, while AC motor has a large torque and is suitable for driving on ramps and uneven roads. In addition, the power of the motor is also a key factor in the selection. The greater the power, the stronger the climbing ability and load capacity of the electric wheelchair. Therefore, when choosing an electric wheelchair, it is necessary to choose the appropriate motor type and power according to the user’s needs and specific use environment. In the difference between electric wheelchairs, it is necessary to distinguish between brush motors and brushless motors, and between AC motors and DC motors.

　　Brushed DC motor refers to a DC motor that uses a carbon brush to contact with a rotating armature to exchange polarity and provide current. Brush provides current to armature through power supply when armature rotates, so it is also called carbon brush motor. Its advantages are simple structure and low use cost, but the brush is easy to wear and has limited service life, and at the same time, the brush will also produce electric spark interference, which will lead to high noise of the motor and is not suitable for high-precision applications.

　　Brushless DC motor refers to a DC motor that uses an electronic commutator to control the phase sequence of the motor, without using a brush to contact the armature. Its advantages are long life, high efficiency, low noise, stable operation and fast response, so it is widely used in high-precision application fields such as high-performance power tools and electric vehicles. Disadvantages are complex structure and high cost.

　　Winter is the peak season for moving companies, but many bad weather factors affect the efficiency of moving companies, which brings many difficulties to moving companies, so the employees of moving companies must pay attention to safety. In snowy days, drivers must clear the snow on the windshield, headlights and mirrors to ensure that they do not block their vision, and move the vehicle slowly before starting to enter the road safely and smoothly.Today, people are interested in house mover Singapore There are also many dependencies, and the expectations for products are getting higher and higher. https://movemove.biz

　　When driving in bad weather, first of all, it is slow, and secondly, it is necessary to keep enough distance from the car in front, and always be ready to take braking measures in advance. Pay attention to the front and rearview mirrors when driving, and pay attention to the vehicles and pedestrians on the left and right sides and in front. Be extra careful when crossing complicated roads, and stop and wait if necessary.

　　Drivers should pay attention to the following four points:

　　(1) Try to avoid non-motor vehicles and pedestrians to prevent them from slipping.

　　(2) Do not slam on the brake, loosen the clutch or refuel while driving.

　　(3) Ensure that the soles are dry, and there shall be no things that affect friction, such as snow and thin ice.

　　(4) Do not overtake or change lanes on roads with ice and snow.

　　There are many heating facilities in winter. And the equipment temperature is very high. In order to avoid being scalded, it is safe and warm to carry furniture with special gloves to prevent high temperature. Only by taking safety measures can we better prevent accidents.

　　Because it is too cold in winter, a lot of furniture becomes very fragile. In order not to harm the interests of both parties, the staff must handle and disassemble the furniture carefully.

　　The company’s handling staff should wear warm clothes, and be sure to wear cold-proof and non-slip shoes issued by the company during handling, and take protective measures. When walking on a snowy road, in order to keep the balance of the center of gravity, the pace should be as steady as possible. This way, it is not easy to slip, and it will ensure your own safety and the integrity of furniture.

　　Before introducing different configurations of electric wheelchairs, let’s first understand the basic structure of electric wheelchairs. Electric wheelchair is usually composed of motor, controller, battery, frame and other main parts. The motor is responsible for driving the wheels, the controller controls the speed and direction of the motor, the battery provides electric energy, and the frame supports the whole structure. Different configurations of electric wheelchairs are different in these parts, which will be introduced in detail below to help you understand.As it happens, many people are killed 電動輪椅價錢 And bring more benefits, make it flourish, and promote the industry greatly. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Motor: The motor of electric wheelchair is its core component, which directly affects the performance of wheelchair. At present, the electric wheelchairs on the market usually adopt DC Motor and AC Motor. DC motor usually has a high speed and is suitable for use on flat roads, while AC motor has a large torque and is suitable for driving on ramps and uneven roads. In addition, the power of the motor is also a key factor in the selection. The greater the power, the stronger the climbing ability and load capacity of the electric wheelchair. Therefore, when choosing an electric wheelchair, it is necessary to choose the appropriate motor type and power according to the user’s needs and specific use environment. In the difference between electric wheelchairs, it is necessary to distinguish between brush motors and brushless motors, and between AC motors and DC motors.

　　Brushed DC motor refers to a DC motor that uses a carbon brush to contact with a rotating armature to exchange polarity and provide current. Brush provides current to armature through power supply when armature rotates, so it is also called carbon brush motor. Its advantages are simple structure and low use cost, but the brush is easy to wear and has limited service life, and at the same time, the brush will also produce electric spark interference, which will lead to high noise of the motor and is not suitable for high-precision applications.

　　Brushless DC motor refers to a DC motor that uses an electronic commutator to control the phase sequence of the motor, without using a brush to contact the armature. Its advantages are long life, high efficiency, low noise, stable operation and fast response, so it is widely used in high-precision application fields such as high-performance power tools and electric vehicles. Disadvantages are complex structure and high cost.

　　Winter is the peak season for moving companies, but many bad weather factors affect the efficiency of moving companies, which brings many difficulties to moving companies, so the employees of moving companies must pay attention to safety. In snowy days, drivers must clear the snow on the windshield, headlights and mirrors to ensure that they do not block their vision, and move the vehicle slowly before starting to enter the road safely and smoothly.for a long time house mover Singapore It has an extraordinary development speed, and I believe that the future will be as overwhelming as ever. https://movemove.biz

　　When driving in bad weather, first of all, it is slow, and secondly, it is necessary to keep enough distance from the car in front, and always be ready to take braking measures in advance. Pay attention to the front and rearview mirrors when driving, and pay attention to the vehicles and pedestrians on the left and right sides and in front. Be extra careful when crossing complicated roads, and stop and wait if necessary.

　　Drivers should pay attention to the following four points:

　　(1) Try to avoid non-motor vehicles and pedestrians to prevent them from slipping.

　　(2) Do not slam on the brake, loosen the clutch or refuel while driving.

　　(3) Ensure that the soles are dry, and there shall be no things that affect friction, such as snow and thin ice.

　　(4) Do not overtake or change lanes on roads with ice and snow.

　　There are many heating facilities in winter. And the equipment temperature is very high. In order to avoid being scalded, it is safe and warm to carry furniture with special gloves to prevent high temperature. Only by taking safety measures can we better prevent accidents.

　　Because it is too cold in winter, a lot of furniture becomes very fragile. In order not to harm the interests of both parties, the staff must handle and disassemble the furniture carefully.

　　The company’s handling staff should wear warm clothes, and be sure to wear cold-proof and non-slip shoes issued by the company during handling, and take protective measures. When walking on a snowy road, in order to keep the balance of the center of gravity, the pace should be as steady as possible. This way, it is not easy to slip, and it will ensure your own safety and the integrity of furniture.

　　Wheelchairs are widely used in patients’ rehabilitation training and family life, such as lower limb dysfunction, hemiplegia, paraplegia below the chest and people with mobility difficulties. As patients’ families and rehabilitation therapists, it is very necessary to know the characteristics of wheelchairs, choose the most suitable wheelchairs and use them correctly.At the same time, 電動輪椅 It is no longer a relatively unfamiliar industry, and it enters the public’s sight more and more frequently, gaining more attention and recognition. https://www.hohomedical.com/collections/light-weight-wheelchair

　　First of all, what harm will an inappropriate wheelchair do to the user?

　　Excessive local compression

　　Form a bad posture

　　Induced scoliosis

　　Causing contracture of joints

　　(What are the unsuitable wheelchairs: the seat is too shallow and the height is not enough; The seat is too wide and the height is not enough)

　　The main parts that wheelchair users bear pressure are ischial tubercle, thigh, popliteal fossa and scapula. Therefore, when choosing a wheelchair, we should pay attention to whether the size of these parts is appropriate to avoid skin wear, abrasions and pressure sores.

　　Let’s talk about the choice of wheelchair, which must be kept in mind!

　　Choice of ordinary wheelchair

　　Seat width

　　Measure the distance between two hips or between two legs when sitting down, and add 5cm, that is, there is a gap of 2.5cm on each side after sitting down. The seat is too narrow, it is difficult to get on and off the wheelchair, and the hip and thigh tissues are compressed; The seat is too wide, it is difficult to sit still, it is inconvenient to operate the wheelchair, the upper limbs are easy to get tired, and it is difficult to get in and out of the gate.

　　Seat length

　　Measure the horizontal distance from the hip to the gastrocnemius of the calf when sitting down, and reduce the measurement result by 6.5cm. The seat is too short, the weight mainly falls on the ischium, and the local pressure is easy to be too much; If the seat is too long, it will compress the popliteal fossa, affect the local blood circulation, and easily irritate the skin of this part. It is better to use a short seat for patients with extremely short thighs or flexion and contracture of hips and knees.

　　Seat height

　　Measure the distance from the heel (or heel) to the popliteal fossa when sitting down, and add 4cm. When placing the pedal, the board surface should be at least 5cm from the ground. The seat is too high for the wheelchair to enter the table; The seat is too low and the ischium bears too much weight.

　　seating washer

　　In order to be comfortable and prevent pressure sores, a seat cushion should be placed on the seat, and foam rubber (5~10cm thick) or gel cushion can be used. To prevent the seat from sinking, a piece of plywood with a thickness of 0.6cm can be placed under the seat cushion.

　　Backrest height

　　The higher the backrest, the more stable it is, and the lower the backrest, the greater the range of motion of the upper body and upper limbs. The so-called low backrest is to measure the distance from the seat surface to the armpit (one arm or two arms extend forward horizontally), and subtract 10cm from this result. High backrest: measure the actual height from the seat surface to the shoulder or back pillow.

　　Handrail height

　　When sitting down, the upper arm is vertical and the forearm is flat on the armrest. Measure the height from the chair surface to the lower edge of the forearm, and add 2.5cm. Proper armrest height helps to maintain correct posture and balance, and can make the upper limbs placed in a comfortable position. The armrest is too high, and the upper arm is forced to lift up, which is easy to fatigue. If the armrest is too low, you need to lean forward to maintain balance, which is not only easy to fatigue, but also may affect your breathing.

　　Other auxiliary parts of wheelchair

　　Designed to meet the special needs of patients, such as increasing the friction surface of the handle, extending the brake, anti-shock device, anti-skid device, armrest mounting arm rest, wheelchair table to facilitate patients to eat and write, etc.

　　Everyone will encounter some problems when moving, and many of these problems bother users who move. Today, Xiaobian of Beijing Moving Company will talk to you about moving skills.As can be seen from the new data, movers and packers The market influence is also growing, and the product share is also relatively increasing, which has great potential in the future. https://movemove.biz

　　First of all, the classification name and the location to be moved to a new home when the goods are sealed need to be written on the outside of the carton, and moving or classifying at that time can significantly improve the moving efficiency and subsequent cleaning up troubles.

　　Secondly, organize the items before moving, and organize them room by room to ensure that there will be no chaos when sorting, and there will be no wrong labels when sorting because there are too many boxes. Unused items can be sorted together first.

　　Then, don’t pack the cartons too slowly. If the cartons are too full, the cartons are prone to deformation, and stacking friction may occur during handling, which is likely to cause the articles in the cartons to be worn. At the same time, it is easy to collapse due to uneven protrusions during stacking, which may hurt people around, which is very dangerous.

　　In addition, there is no need to reserve too many gaps in the packing process, which will lead to the instability and movement of the boxes, increase the friction between the boxes, and cause damage to the internal items. Fragile items can also be used as cushions with foam or newspapers. Large items also need to be packed in big boxes, and very heavy items need to be packed in small boxes, which is convenient for Hanyang moving company to carry. If heavy items are still piled up in big boxes, it is difficult for movers to move them.

　　Some oversized boxes or cabinets need to be moved, so tell the moving cost in advance, so that they will prepare some tools for moving in advance, which will ensure the efficiency of moving, and at the same time, some fragile items will be protected by cushions in the cartons. There are also small items such as cash and jewelry to carry with you, or register them with the moving company for detailed verification, so that there will be no problems after moving, especially fragile items, so you can say hello to the porter in advance and make it clear.

　　Everyone will encounter some problems when moving, and many of these problems bother users who move. Today, Xiaobian of Beijing Moving Company will talk to you about moving skills.As can be seen from the new data, movers and packers The market influence is also growing, and the product share is also relatively increasing, which has great potential in the future. https://movemove.biz

　　First of all, the classification name and the location to be moved to a new home when the goods are sealed need to be written on the outside of the carton, and moving or classifying at that time can significantly improve the moving efficiency and subsequent cleaning up troubles.

　　Secondly, organize the items before moving, and organize them room by room to ensure that there will be no chaos when sorting, and there will be no wrong labels when sorting because there are too many boxes. Unused items can be sorted together first.

　　Then, don’t pack the cartons too slowly. If the cartons are too full, the cartons are prone to deformation, and stacking friction may occur during handling, which is likely to cause the articles in the cartons to be worn. At the same time, it is easy to collapse due to uneven protrusions during stacking, which may hurt people around, which is very dangerous.

　　In addition, there is no need to reserve too many gaps in the packing process, which will lead to the instability and movement of the boxes, increase the friction between the boxes, and cause damage to the internal items. Fragile items can also be used as cushions with foam or newspapers. Large items also need to be packed in big boxes, and very heavy items need to be packed in small boxes, which is convenient for Hanyang moving company to carry. If heavy items are still piled up in big boxes, it is difficult for movers to move them.

　　Some oversized boxes or cabinets need to be moved, so tell the moving cost in advance, so that they will prepare some tools for moving in advance, which will ensure the efficiency of moving, and at the same time, some fragile items will be protected by cushions in the cartons. There are also small items such as cash and jewelry to carry with you, or register them with the moving company for detailed verification, so that there will be no problems after moving, especially fragile items, so you can say hello to the porter in advance and make it clear.

　　Wheelchairs are widely used in patients’ rehabilitation training and family life, such as lower limb dysfunction, hemiplegia, paraplegia below the chest and people with mobility difficulties. As patients’ families and rehabilitation therapists, it is very necessary to know the characteristics of wheelchairs, choose the most suitable wheelchairs and use them correctly.According to professional reports, 電動輪椅 There will be a great period of growth, and the market business is constantly expanding, and it will definitely become bigger and bigger in the future. https://www.hohomedical.com/collections/light-weight-wheelchair

　　First of all, what harm will an inappropriate wheelchair do to the user?

　　Excessive local compression

　　Form a bad posture

　　Induced scoliosis

　　Causing contracture of joints

　　(What are the unsuitable wheelchairs: the seat is too shallow and the height is not enough; The seat is too wide and the height is not enough)

　　The main parts that wheelchair users bear pressure are ischial tubercle, thigh, popliteal fossa and scapula. Therefore, when choosing a wheelchair, we should pay attention to whether the size of these parts is appropriate to avoid skin wear, abrasions and pressure sores.

　　Let’s talk about the choice of wheelchair, which must be kept in mind!

　　Choice of ordinary wheelchair

　　Seat width

　　Measure the distance between two hips or between two legs when sitting down, and add 5cm, that is, there is a gap of 2.5cm on each side after sitting down. The seat is too narrow, it is difficult to get on and off the wheelchair, and the hip and thigh tissues are compressed; The seat is too wide, it is difficult to sit still, it is inconvenient to operate the wheelchair, the upper limbs are easy to get tired, and it is difficult to get in and out of the gate.

　　Seat length

　　Measure the horizontal distance from the hip to the gastrocnemius of the calf when sitting down, and reduce the measurement result by 6.5cm. The seat is too short, the weight mainly falls on the ischium, and the local pressure is easy to be too much; If the seat is too long, it will compress the popliteal fossa, affect the local blood circulation, and easily irritate the skin of this part. It is better to use a short seat for patients with extremely short thighs or flexion and contracture of hips and knees.

　　Seat height

　　Measure the distance from the heel (or heel) to the popliteal fossa when sitting down, and add 4cm. When placing the pedal, the board surface should be at least 5cm from the ground. The seat is too high for the wheelchair to enter the table; The seat is too low and the ischium bears too much weight.

　　seating washer

　　In order to be comfortable and prevent pressure sores, a seat cushion should be placed on the seat, and foam rubber (5~10cm thick) or gel cushion can be used. To prevent the seat from sinking, a piece of plywood with a thickness of 0.6cm can be placed under the seat cushion.

　　Backrest height

　　The higher the backrest, the more stable it is, and the lower the backrest, the greater the range of motion of the upper body and upper limbs. The so-called low backrest is to measure the distance from the seat surface to the armpit (one arm or two arms extend forward horizontally), and subtract 10cm from this result. High backrest: measure the actual height from the seat surface to the shoulder or back pillow.

　　Handrail height

　　When sitting down, the upper arm is vertical and the forearm is flat on the armrest. Measure the height from the chair surface to the lower edge of the forearm, and add 2.5cm. Proper armrest height helps to maintain correct posture and balance, and can make the upper limbs placed in a comfortable position. The armrest is too high, and the upper arm is forced to lift up, which is easy to fatigue. If the armrest is too low, you need to lean forward to maintain balance, which is not only easy to fatigue, but also may affect your breathing.

　　Other auxiliary parts of wheelchair

　　Designed to meet the special needs of patients, such as increasing the friction surface of the handle, extending the brake, anti-shock device, anti-skid device, armrest mounting arm rest, wheelchair table to facilitate patients to eat and write, etc.