Rechargeable batteries have gradually become a necessity in people’s daily life. My friends, do you know how much safety hazard will be brought about by the irregular operation of electric wheelchair batteries? When the battery is charged for a long time, physical and chemical reactions are easy to occur inside the battery, resulting in a large amount of heat and gas. When the battery is overloaded and charged, it is easy to explode, igniting the plastic parts of the electric vehicle and releasing a large amount of toxic smoke, resulting in casualties and property losses.In the eyes of peers, 電動輪椅價錢 It has good qualities that people covet, and it also has many loyal fans that people envy. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Pay attention to the following items when charging the battery:

　　1. When charging the electric wheelchair, use the charger adapted to the electric wheelchair, and check whether the rated input voltage of charging is consistent with the power supply voltage. It is forbidden to cover or place the charger on the seat cushion. Unplug the plug on the AC power supply after charging, and then unplug the plug connected to the battery. It is forbidden to connect the charger to the AC power supply for a long time without charging.

　　2. The charging time of the electric wheelchair is suggested to be 6-8 hours. When the charging indicator light changes from red to green, it means that the battery is fully charged. Do not charge the electric wheelchair for a long time, especially in summer, when it is hot and charging for a long time, it is difficult for the charger to dissipate heat and cause combustion. Keep an eye on it when charging.

　　3. When charging the electric wheelchair, check whether the connector is loose, whether the line equipment is aging, and the rubber of the wire is damaged, which may easily lead to short circuit and fire.

　　4. Qualified electric wheelchairs, chargers and batteries produced by manufacturers with production licenses shall be used, and electric wheelchairs and accessories shall not be modified in violation of regulations. It is strictly forbidden to change or modify the charging circuit without permission. If the product or personnel accident occurs as a result, the manufacturer is not responsible.

　　5. Electric wheelchairs should be parked in designated areas, not in stairwells, evacuation passages, and not occupying fire truck passages.

　　6. Do not buy and use some non-standard and over-standard electric wheelchairs, and do not use non-original chargers to charge electric wheelchairs.

　　7. Do not charge the electric wheelchair by private wiring, and do not charge it indoors, in the basement, at the entrance of the building, etc. Avoid charging immediately after driving at high temperature.

　　8. Electric wheelchairs that are not used for a long time should be charged first, and placed after being fully charged, and then the main switch of the circuit should be disconnected.

　　9. Keep a good ventilation environment at the charging place. Do not charge in the sun or wet environment. Be sure to stay away from flammable and explosive materials during charging and storage. Do not expose the charger to outdoor heat sources, such as radiator, fire source and sunlight.

　　10. Do not move the wheelchair while the electric wheelchair is charging.

　　11. Never modify the electric wheelchair, and check and maintain it regularly to prevent problems before they happen.

　　Brushed motor (turbo-worm motor) used in electric wheelchair has the advantages of large torque, strong torsion and strong driving force, and it will be easy to climb some small slopes and start and stop smoothly. Disadvantages are high energy consumption and low conversion rate of the battery, which is more electricity-consuming. Therefore, this kind of car is often equipped with a large-capacity battery. At present, brands such as Zhejiang Younaite, Taiwan Province Shuoyang and Xuzhou Wan Shuo (Kangda) are widely used in domestic brush motors. Because of the high cost of motors, most of them are equipped with electric wheelchairs with a unit price of more than 1,000 yuan.Down-to-earth right 電動輪椅價錢 In-depth research is the only way to pursue development. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Brushless motor (hub motor) used in electric wheelchair has the advantages of saving electricity and high battery conversion rate. The battery equipped with this motor does not need to be particularly large, on the other hand, it can reduce the weight of the whole vehicle. Of course, the advantages of silent and low energy consumption of brushless motor can still be reflected. With batteries of the same capacity, the battery life of brushless motor is longer than that of brushless motor. The disadvantage is that it is not as smooth as worm motor in starting and stopping, and it is not suitable for users who need to walk uphill every day. In recent years, it is more common on urban roads. There are other brands such as domestic Jindun, Uninet and Shilin. Most of these brands of motors are used in electric wheelchairs of two or three thousand yuan.

　　Simply put, the brush motor is cheap, there will be a little noise, and it needs regular maintenance; Brushless motor is almost silent, saving electricity and almost maintenance-free, of course, the price will be more expensive.

　　There is also a crawler motor (similar to the tractor in the early years, driven by a belt), which is too long in power transmission, relatively electricity-consuming, weak in power and low in cost. At present, only a few manufacturers are applying this motor.

　　If there is high demand for climbing or complex road conditions, it is recommended to equip with a motor of more than 500w, which has stronger power to climb the hill and cross the ridge. Please choose according to your own situation.

　　Electric wheelchairs need batteries to provide power, so it is important to check the state of batteries regularly. Both lead-acid batteries and lithium batteries have limited service life. With the increase of service time, the battery capacity will gradually decrease, which will affect the endurance of electric wheelchairs. It is generally recommended to check the battery performance every 1.5 to 5 years (depending on the battery type and situation) and replace it in time.Even if there are obstacles to moving forward, 電動輪椅價錢 We should also persevere, forge ahead bravely, cut waves in the sea of the market, hang on to Yun Fan and strive for the first place. https://www.hohomedical.com/collections/light-weight-wheelchair

　　02

　　tyre

　　Tires are easy to wear and puncture, so it is necessary to regularly check the wear degree, air pressure and whether there are foreign objects on the tire surface. Damaged or aged tires need to be replaced in time.

　　03

　　Brake system

　　Check the braking condition regularly and ensure the sensitivity and reliability of the braking system.

　　04

　　Motor and drive system

　　Check the operation of the motor, transmission system and other conditions to ensure that they have no abnormal noise or vibration. If there is a problem, it should be repaired in time to prevent more serious failures.

　　05

　　Joystick and control system

　　Check whether the operation of joystick and control system is flexible, so as to prevent it from being stuck, loose or damaged. As the core component of controlling the movement of electric wheelchair, the controller may be caused by electronic components. Failure due to aging, humidity or impact. Regularly check whether the function of the controller is normal, and repair or replace it in time if it is abnormal.

　　06

　　charger

　　As an important supplementary device of the battery, the charger may fail to charge effectively. Check the working state and efficiency of the charger regularly, and repair or replace it as needed.

　　Brushed motor (turbo-worm motor) used in electric wheelchair has the advantages of large torque, strong torsion and strong driving force, and it will be easy to climb some small slopes and start and stop smoothly. Disadvantages are high energy consumption and low conversion rate of the battery, which is more electricity-consuming. Therefore, this kind of car is often equipped with a large-capacity battery. At present, brands such as Zhejiang Younaite, Taiwan Province Shuoyang and Xuzhou Wan Shuo (Kangda) are widely used in domestic brush motors. Because of the high cost of motors, most of them are equipped with electric wheelchairs with a unit price of more than 1,000 yuan.Down-to-earth right 電動輪椅價錢 In-depth research is the only way to pursue development. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Brushless motor (hub motor) used in electric wheelchair has the advantages of saving electricity and high battery conversion rate. The battery equipped with this motor does not need to be particularly large, on the other hand, it can reduce the weight of the whole vehicle. Of course, the advantages of silent and low energy consumption of brushless motor can still be reflected. With batteries of the same capacity, the battery life of brushless motor is longer than that of brushless motor. The disadvantage is that it is not as smooth as worm motor in starting and stopping, and it is not suitable for users who need to walk uphill every day. In recent years, it is more common on urban roads. There are other brands such as domestic Jindun, Uninet and Shilin. Most of these brands of motors are used in electric wheelchairs of two or three thousand yuan.

　　Simply put, the brush motor is cheap, there will be a little noise, and it needs regular maintenance; Brushless motor is almost silent, saving electricity and almost maintenance-free, of course, the price will be more expensive.

　　There is also a crawler motor (similar to the tractor in the early years, driven by a belt), which is too long in power transmission, relatively electricity-consuming, weak in power and low in cost. At present, only a few manufacturers are applying this motor.

　　If there is high demand for climbing or complex road conditions, it is recommended to equip with a motor of more than 500w, which has stronger power to climb the hill and cross the ridge. Please choose according to your own situation.

　　It is the energy source of electric wheelchairs, which can be divided into lead-acid batteries and lithium batteries. The voltage of electric wheelchairs is generally 24v. The different ah capacity of batteries directly affects the overall weight, endurance and service life of wheelchairs. With the continuous development of lithium battery technology, modern electric wheelchairs usually use lithium batteries as the power source.Now, everyone is right 電動輪椅價錢 Are more concerned, hoping to get more benefits from it. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Lithium batteries have the advantages of high energy density, light weight and fast charging speed, which can provide a longer cruising range. There are also 6AH lithium batteries in the market that meet the standards of air boarding. People with disabilities and mobility difficulties can travel with portable electric wheelchairs and batteries.

　　If the 20ah lead-acid battery is compared with the 20ah lithium battery, the lithium battery has a lighter weight and a longer battery life, and the life of the lithium battery is relatively long, about twice the life of the lead-acid battery, but the cost of lithium battery will be higher. Lead acid, on the other hand, is relatively more economical, and there are many after-sales points of electric vehicles under the domestic battery brands such as Chaowei, which is convenient for maintaining batteries and replacing carbon brushes, and can meet the needs of users for long-term use.

　　At present, lithium battery electric wheelchairs are mainly used in portable electric wheelchairs, which are relatively inferior to lead-acid in battery life. The later replacement cost is also high. Here, you can refer to the approximate cruising range of the battery collected by Xiaobian. The battery life will be different due to different road conditions, different people’s weights and continuous exercise time.

　　With the progress of science and technology, the design and technology of electric wheelchairs are constantly improving. In the 1960s, electric wheelchairs began to use rechargeable batteries, which made them last longer and charge more conveniently. In the 1970s, the materials and structures of electric wheelchairs began to be improved, making them more portable and stable. In 1980s, with the development of computer technology, intelligent control system was introduced into electric wheelchairs, which made the wheelchairs operate more accurately and the user experience better. In addition, the battery technology of electric wheelchairs has also made a revolutionary breakthrough.At first, 電動輪椅 It developed out of control and gradually opened up a sky of its own. https://www.hohomedical.com/collections/light-weight-wheelchair

　　The traditional lead-acid battery is gradually replaced, and the new lithium battery and fuel cell technology are applied to electric wheelchairs, which greatly improves the endurance and service life of wheelchairs. These technological innovations not only make electric wheelchairs more environmentally friendly, but also provide users with longer use.

　　The types of electric wheelchairs are becoming more and more abundant. According to different functions and usage scenarios, electric wheelchairs can be divided into indoor electric wheelchairs, outdoor electric wheelchairs, folding electric wheelchairs and many other types. Indoor electric wheelchairs are usually small and suitable for use in indoor environments, such as homes and hospitals.

　　Outdoor electric wheelchairs are more powerful, have better passability, and are suitable for outdoor complex road conditions. The folding electric wheelchair is portable and can be carried and stored conveniently. Modern electric wheelchairs use lightweight aluminum alloy frames, intelligent control systems and high-performance batteries. The application of these technologies makes the electric wheelchair more intelligent, convenient and comfortable.

　　With the progress of science and technology, the design and technology of electric wheelchairs are constantly improving. In the 1960s, electric wheelchairs began to use rechargeable batteries, which made them last longer and charge more conveniently. In the 1970s, the materials and structures of electric wheelchairs began to be improved, making them more portable and stable. In 1980s, with the development of computer technology, intelligent control system was introduced into electric wheelchairs, which made the wheelchairs operate more accurately and the user experience better. In addition, the battery technology of electric wheelchairs has also made a revolutionary breakthrough.Sufficient data show that 電動輪椅 It can drive many people to find jobs, thus driving economic development. https://www.hohomedical.com/collections/light-weight-wheelchair

　　The traditional lead-acid battery is gradually replaced, and the new lithium battery and fuel cell technology are applied to electric wheelchairs, which greatly improves the endurance and service life of wheelchairs. These technological innovations not only make electric wheelchairs more environmentally friendly, but also provide users with longer use.

　　The types of electric wheelchairs are becoming more and more abundant. According to different functions and usage scenarios, electric wheelchairs can be divided into indoor electric wheelchairs, outdoor electric wheelchairs, folding electric wheelchairs and many other types. Indoor electric wheelchairs are usually small and suitable for use in indoor environments, such as homes and hospitals.

　　Outdoor electric wheelchairs are more powerful, have better passability, and are suitable for outdoor complex road conditions. The folding electric wheelchair is portable and can be carried and stored conveniently. Modern electric wheelchairs use lightweight aluminum alloy frames, intelligent control systems and high-performance batteries. The application of these technologies makes the electric wheelchair more intelligent, convenient and comfortable.

　　The treatment of corrosive liquids has always been a common challenge in many industrial fields. To solve this problem, it is particularly important to choose a pump suitable for transporting corrosive media. The KB series self-priming acid alkali pump is a high-performance pump that combines multiple advantages and is suitable for various complex working environments such as acid and alkali. The following are the characteristics, performance, applications, and selection references of KB series self-priming acid alkali pumps. We hope that through this article, everyone can have a deeper understanding of KB series self-priming pumps.Hope for the future Chemical filter It can achieve rapid and stable development and serve social development and people’s needs well. http://www.luoyuan108.com/

　　Product Features

　　1. Unique shaft seal design – The interior adopts Teflon Bellow Seal self cooling design, effectively protecting the pump shaft and improving cooling effect. This design ensures stable operation of the pump under harsh conditions and improves its service life.

　　2. Self suction design – The self suction force is particularly strong, reaching up to 20ft, effectively avoiding liquid backflow inside the pump. At the same time, the equipped check valve design further prevents liquid backflow, ensuring the stable operation of the pump.

　　3. Strong acid resistance, strong alkali resistance, and strong corrosion resistance – made of materials such as CFRPP and PVDF, it can resist the erosion of various corrosive media such as strong acids and bases, ensuring the long-term service life of the pump.

　　4. The integrated design of the rear cover, shaft seal shield, and foot seat makes maintenance and assembly more convenient, while also enhancing the overall aesthetics of the pump.

　　5. The inlet needs to be equipped with a bottom valve – the bottom valve can effectively block the suction of foreign objects and protect the safe operation of the pump.

　　6. The outlet needs to be equipped with a check valve – a check valve can prevent instantaneous backflow during shutdown, avoiding damage to the pump body and pump idling.

　　Specification parameters

　　Flow range: 200-900 (L/min)

　　Head range: 6-32 (m)

　　Materials used: FRPP, PVDF

　　Motor power: 0.75-7.5 (kw)

　　Temperature range: 0-75 ≧ (PP, FRPP) 0-90 ≧ (PVDF)

　　Usage and maintenance

　　1. Before using the pump, please ensure that the bottom valve is installed correctly to prevent foreign objects from being sucked into the pump.

　　2. Before starting the pump, please check if the inlet and outlet valves are open to ensure the normal operation of the pump.

　　3. It is recommended to regularly inspect and maintain the pump to ensure its normal operation and extend its service life.

　　4. Regularly replace bearings and seals to avoid wear and leakage.

　　5. If any abnormal situation is found during the operation of the pump, it should be stopped immediately for inspection.

　　Application Fields

　　The KB series self-priming acid and alkali resistant pumps are widely used in chemical, pharmaceutical, food, environmental protection and other fields. In these fields, KB pumps can be used to transport various corrosive media such as acids, bases, salts, etc. For example, in the chemical industry, KB pumps can be used to transport corrosive acid liquids such as sulfuric acid and hydrochloric acid; In the pharmaceutical industry, KB pumps can be used to transport various drug solutions; In the food industry, KB pumps can be used to transport various acid-base solutions and corrosive food additives.

　　Other fields: In addition to the above fields, KB pumps can also be applied in environmental protection, oil, natural gas and other fields. For example, in the field of environmental protection, KB pumps can be used to treat pollutants such as industrial wastewater and acidic gases. In the field of oil and gas, KB pumps can be used to transport various corrosive media, such as acidic gases, alkaline solutions, etc.

　　Selection suggestions

　　When choosing a self-priming pump, the following factors need to be considered:

　　1. Medium characteristics: including the corrosiveness, viscosity, density, and other properties of the medium, in order to select suitable materials and structures.

　　2. Process parameters: including flow rate, head, pressure, and other parameters to select the appropriate model and power.

　　3. Environmental conditions: including temperature, humidity, air quality, etc., in order to select the appropriate protection level and motor configuration.

　　4. Application scenarios: including the industry of use, purpose, installation method, etc., in order to select suitable functions and structures.

　　5. Based on the above factors, it is possible to choose the appropriate KB pump model and configuration for the application. In addition, it is recommended to consider factors such as brand and quality assurance when selecting pumps to ensure long-term stable operation and service life.

　　In summary, the KB series self-priming acid alkali pump is a high-performance, corrosion-resistant, and easy to maintain pump. Its unique shaft seal design and self-priming design make it perform well in handling corrosive liquids. Whether in the chemical, pharmaceutical, or other industrial fields, the KB series self-priming acid and alkali resistant pumps are a reliable choice. If you need more information about the KB series self-priming acid alkali pump, please feel free to contact our professional team, and we will be happy to serve you.

　　There are many choices of seat back cushion and cushion materials for electric wheelchairs in the market, mainly including mesh cotton and honeycomb materials. The choice of these materials will affect the comfort and ventilation of the seat. For example, compared with honeycomb materials, mesh cotton is more breathable and less likely to store heat. A comfortable wheelchair cushion should conform to the contour of human buttocks, providing good support and wrapping.precisely because 電動輪椅 The rapid development of, so also brought new opportunities to the industry. https://www.hohomedical.com/collections/light-weight-wheelchair

　　In addition, the cushion also needs to have air permeability and good hygroscopicity to ensure the dryness of the skin surface. Considering that the user’s long-term use of local skin temperature will accelerate the cell metabolism rate, which will make the skin sweat and ulcer when immersed in a humid environment for a long time.

　　The quality of seat back cushion is mainly judged by fabric smoothness, tension and routing details. Laymen can also distinguish the advantages and disadvantages of the seat back cushion by carefully observing these details.

　　With the continuous development of industrial technology, pump equipment plays an increasingly important role in industrial production. In the fields of chemical engineering, medicine, food, etc., pump equipment, as an important tool for conveying media, has a significant impact on production efficiency and quality. In recent years, with the strengthening of environmental awareness and the increasing demand for safety production, enterprises have become more strict in product selection. In the post pandemic era, the global economy is in a downturn, and business operations are facing even more severe challenges. How to reduce costs and increase efficiency, improve production efficiency and product quality has become an urgent problem for enterprises to solve. As one of the important transportation tools, the selection and optimization of pump equipment have also become an important way for enterprises to improve production efficiency and reduce costs.Actually, it’s not just this reason, chemical pump Its own advantages are also obvious, and it is normal for the market to perform well. http://www.luoyuan108.com/

　　The KG series of coaxial acid alkali resistant pumps we have launched are carefully developed to meet the needs of enterprises. This pump has multiple unique design and technological advantages, which can reduce costs, improve production efficiency, and ensure production safety for chemical enterprises. Let’s learn about the features and advantages of this pump together.

　　01 Product Features

　　The KG series coaxial acid alkali resistant pump is a pump designed for the chemical industry, which has the following characteristics:

　　1. Wide applicability: This pump can be applied to media with various chemical properties, and its applicable temperature is below 85 ≧ for FRPP and PVDF, depending on the different chemical properties. At the same time, choosing different pump body materials can resist strong acids and alkalis, as well as the chemical properties used in fluorination series.

　　2. Unique shaft seal design: adopting Teflon Bellows Seal self cooling type, selecting shaft seal materials Sic, Carbon, Ceramic according to various chemical properties. Compared to other similar products, the shaft seal design of this pump is more unique, which can effectively ensure the service life and operational safety of the pump.

　　3. The rear cover is a combination type: easy to assemble, with no cooling circulation circuit design, and cannot be used idle. The rear cover of the pump adopts a combination design, which is easy to assemble and does not require a cooling circulation circuit, ensuring the safe operation of the pump.

　　4. Low noise: The pump is made of high-quality materials and exquisite craftsmanship, with advantages such as low noise and low vibration. It ensures stable operation of the pump while reducing noise interference during the production process.

　　5. High reliability: The pump adopts advanced production technology and precise mechanical processing, and has undergone multiple rigorous tests and verifications to ensure the reliability and stability of the product.

　　02 Product specifications and parameters

　　03 Advantage Comparison

　　Compared with traditional pumps, the advantages of KG series coaxial acid alkali resistant pumps are:

　　Low noise and low vibration: Designed with advanced fluid analysis technology, the pump’s noise and vibration are minimized, ensuring a quiet and stable production site.

　　Low energy consumption: The design and optimization of pumps can greatly reduce energy consumption, thereby saving energy costs.

　　Long lifespan: The shaft seal of the pump adopts a Teflon Bellows Seal self cooling design, which can greatly extend the service life of the pump.

　　No need for additional cooling circulation circuit: The rear cover of the pump is a combination type, easy to assemble, without a cooling circulation circuit design, and cannot be used idle, making the use of the pump more convenient and reliable.

　　04 Application Fields

　　The KG series coaxial acid alkali resistant pumps are widely used in industries such as chemical, pharmaceutical, electronics, and environmental protection for the transportation, filtration, and circulation of acid alkali liquids. For example:

　　Chemical industry: In fields such as organic synthesis and hydrocarbon cracking, acid-base liquids are inevitable, which requires reliable acid-base pumps for transportation.

　　Pharmaceutical industry: In the process of drug synthesis and formulation, a certain amount of acid-base liquid is required, and the role of acid-base pump is particularly important.

　　Electronics industry: In the production of semiconductors, LCD displays, and other products, various corrosive and electroplating solutions are required. These liquids have strong corrosiveness and volatility, and high-quality corrosion-resistant pumps are needed. The FRPP and PVDF materials of KG series pumps can withstand the corrosion of these chemicals, and adopt a unique Teflon Bellows Seal self cooling shaft seal design, effectively avoiding the damage of chemical corrosion to the pump.

　　Overall, the KG series coaxial acid alkali resistant pumps have the advantages of high efficiency, corrosion resistance, safety, and stability, and are widely used in various industries. Our company will continue to be committed to developing high-quality and efficient pumps, providing high-quality products and services for various industries.